Fingerprint ID not working

Yinuo Zhu 0 Reputation points
2026-11-19T06:28:09.7766667+00:00

I recently found out that after an update to windows 11 26H2 my fingerprint reader was no longer working and each time I try to restore it it says that the option is unavailable and they can't find a compatible scanner which is weird because it's built in? I have a dell inspiron 14 2 in 1 if that makes a difference? Any help is appreciated thank you.

Windows for home | Windows 11 | Accounts, profiles, and login
0 comments No comments

2 answers

Sort by: Newest
  1. GsN5034 - IA 80,215 Reputation points Independent Advisor
    2026-11-19T07:24:53.75+00:00

    Hello,

    Is it the Dell Inspiron 14 7420 2-in-1 model or the newer Inspiron 14 7440 2-in-1?

    Type msinfo in the search bar on the taskbar, then press Enter.

    Post a screenshot of the resulting dialog box.

    I will help you find the compatible drivers for your device model.

    Was this answer helpful?


  2. AI answer

    2026-11-19T06:29:12.52+00:00

    Install the Dell fingerprint-reader driver for the exact Inspiron 14 2-in-1 model, because Windows Hello cannot offer fingerprint setup while its biometric device and compatible driver are not detected.

    1. Reinstall the model-specific Dell driver

    1. Find the complete model number:
      • Press Windows key + R, enter msinfo32, and press Enter.
      • Note System Model—for example, Inspiron 14 7440 or 7445. “Inspiron 14 2-in-1” alone covers multiple hardware configurations.
    2. Open Dell Support and identify the computer by its model or Service Tag.
    3. Under Drivers & Downloads, install:
      • The fingerprint/biometric driver for that exact model.
      • Any applicable chipset and BIOS updates shown for the computer.
    4. Restart Windows.
    5. Open Settings > Accounts > Sign-in options > Fingerprint recognition (Windows Hello) and check whether Set up is available.

    Dell’s procedure specifically recommends installing the Dell-provided fingerprint-reader driver before enrolling Windows Hello again.^1^

    2. Check how the sensor appears in Device Manager

    Right-click Start > Device Manager, select View > Show hidden devices, and expand Biometric devices.

    If the fingerprint reader is listed:

    1. Right-click it and select Properties > Driver.
    2. If Roll Back Driver is available, use it because the problem began after an update, then restart. Microsoft documents driver rollback as the appropriate recovery when a device stops working after Windows Update.^2^
    3. If rollback is unavailable or ineffective:
      • Right-click the reader and select Uninstall device.
      • Do not select an option to remove the driver package unless the Dell installer has already been downloaded.
      • Restart the PC, then run the Dell driver installer again.

    Microsoft’s Windows Hello troubleshooting procedure also directs users with this exact “couldn’t find a compatible fingerprint scanner” state to reinstall the device from Biometric devices, restart, and test again.^3^

    If “Biometric devices” is absent:

    1. Look under Other devices for an unknown device or a device with a warning icon.
    2. Install the Dell driver obtained above.
    3. Check Settings > Windows Update > Advanced options > Optional updates for an offered biometric or firmware driver. Optional drivers are not installed automatically.^4^
    4. Restart and check Device Manager again.

    3. If Windows still cannot detect the built-in reader

    Enter the Dell BIOS/UEFI—commonly by pressing F2 while the Dell logo appears—and check whether a fingerprint or biometric device is listed and enabled under Security, Advanced, or I/O Devices. Save any change and restart.^5^

    If the reader remains absent from Device Manager after the correct Dell driver, BIOS update, and BIOS check, contact Dell Support with the exact model and Service Tag. At that point Windows is not enumerating the hardware, so Dell needs to determine whether that configuration has a reader fault or requires model-specific firmware.

    Do not remove and re-enroll the existing fingerprint yet: that procedure applies when Windows detects the reader but rejects or confuses an enrolled fingerprint. Here, Windows reports that no compatible scanner exists, so device detection and driver recovery come first.

    The Enhanced sign-in security toggle documented for Windows 11 24H2 and later primarily addresses external or third-party readers, not a built-in Dell sensor, so disabling it is not the appropriate initial step here.^6^


    References

    1. How to Enroll a Fingerprint in Windows Hello and Troubleshooting Steps | Dell US
    2. Update drivers through Device Manager in Windows | Microsoft Support
    3. Windows Hello Enhanced Sign-in Security
    4. [Windows 11](https://support.microsoft.com/windows/hardware/drivers/automatically-get-recommended-and-updated-hardware-drivers#summary)
    5. HOW TO FIX FINGERPRINT SENSOR - Microsoft Q&A
    6. Using third-party fingerprint readers and cameras with Windows Hello | Microsoft Support
    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.