Delete EFI partition on external drive.

Anonymous
2024-06-18T13:31:49+00:00

I've been having problems regarding SSD cloning. Macrium have been very helpful. It appears that I'm booting from the 2 installed internal hard drives (!?!).

It was working OK for ages but obviously something subsequently has happened.

It was recommended I clone to an external drive.

Fortunately I had a another SDD that I could use. I reformatted this and connected externally . Checked with file folder that it could be read and was empty. All good.

Used Macrium to clone but was concerned that if supposedly booting form 2 internal drives, what am I copying, and would it work?

It didn't!

Both drives had 3 partitions; An EFI System partition (100MB), Windows 11 Home partition (465 GB) and a Recovery Partition ((610MB)

To cut long story short, the external drive now consists of 2 partitions, The EFI partition and an unallocated partition.

The external SDD is no accessible !!. I get the message "You currently don't have permission to access this folder" and continuing, "You have been denied access to this folder" " to gain access to this folder you will have to use the security tab"

Don't understand what to do next.

Using Disk Management and right clicking on greyed out EFI partition gives a greyed out window

Can anyone help in getting this 'external' drive accessible again ?

Windows for home | Windows 11 | Recovery and backup

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

107 answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Ramesh Srinivasan 90,210 Reputation points Independent Advisor
    2024-06-22T10:03:26+00:00

    It ran fine. Please see if you can boot from disk 0 (or disconnect disk 1 to test). The boot option needs to be changed in the UEFI.

    Was this answer helpful?

    0 comments
  2. Anonymous
    2024-06-22T10:02:14+00:00

    As requested:-

    Was this answer helpful?

    0 comments
  3. Anonymous
    2024-06-22T09:21:33+00:00

    Hi Ramesh,

    As requested:-

    Image

    Also added Disk Management profile:-

    Can you explain why 'diskpart' shows 4 partitions and 'disk management' only 3 ?? Partition 2 (I assume) appears "hidden"

    Was this answer helpful?

    0 comments
  4. Ramesh Srinivasan 90,210 Reputation points Independent Advisor
    2024-06-21T14:38:37+00:00

    Thanks for the update.

    You can make Disk 0 bootable. That should be an easy task.

    Please open an admin Command Prompt, and run:

    diskpart
select disk 0
list part

    Post the screenshot here.

    Was this answer helpful?

    0 comments
  5. Anonymous
    2024-06-21T14:19:22+00:00

    Magic! Disc cleaned, initialised and volume created. Now back in operation. Many thanks for your support.

    Now to see what happens when I try and image C:/ to this external drive,

    Concerned that have to have both internal (C:/ and D:/ - original image) drives for system to successfully boot.

    Was this answer helpful?

    0 comments