無法安裝Windows 10 64bit v1511,1607,1703,1709&1803. 只能用v1507. 請協助解決此ATI晶片?及WINDOWS 10 64bit之間的問題

無法安裝Windows 10 64bit v1511,1607,1703,1709&1803. 只能用v1507.

請協助解決此ATI晶片?及WINDOWS 10 64bit之間的問題

BENQ Joybook A52E(筆記簿)配置:

北橋: ATI RC415MD(整合ATI Xpress 200M顯示晶片) , 南橋: ATI SB460, CPU: Intel Core 2 Duo T7200 2GHz 667FSB PPGA478(Socket M), 主板CPU Socket: mPGA479m, RAM: 2 x 2GB DDR2 800(最高只能以533運作共只能用到約2.7GB), 120GB SATA 硬碟, IDE DVD刻錄機

即使我在BIOS及啟動選單選了用USB記憶棒/USB光碟機啟動, 但都不能以USB記憶棒/USB光碟機啟動筆記簿. 加上IDE光碟機不能讀DVD+DL, 我需用另一部桌面電腦安裝Windows 10.

在桌面電腦安裝時第一次WINDOWS 10重啟至POST時, 我關機並把筆記簿硬碟從桌面電腦取出, 再放回筆記簿中使用.

我發現啟動時見到Windows 標誌及旋轉的圓點環時就當機.

即使在桌面電腦完成整個WINDOWS安裝後, 再換硬碟到筆記簿用, 見到二次重啟失敗後再重啟出現自動修復, 並見到旋轉的圓點環時又當機.

我發現我無法用Windows 10 64bit v1511,1607,1703,1709及1803. 只能正常用到v1507.

我在用v1507時自動升級去v1709, 重啟見到Windows 標誌及旋轉的圓點環時就當機. 再重啟說更新失敗, 還是v1507. 接著它又不停地自動重裝v1709, 變磚情況不段重覆, 不行了!!!

我在用v1507再掛載v1709 ISO升到 v1709後, 重啟見到Windows 標誌及旋轉的圓點環時就當機.

即使在桌面電腦中預先選了下次重啟時用安全模式, 把硬碟換到筆記簿中重啟時也不能進入安全模式

己用盡修正 Windows Update 問題所有超費時的方法但最終全都無法解決問題.

I can't install Windows 10 64bit v1511,1607,1703,1709&1803. I can only use v1507.

Please help to fix the ATI chipset? problem with windows 10 64bit.

BENQ Joybook A52E(Notebook) spec:

North Bridge: ATI RC415MD(Integrated VGA: ATI Xpress 200M), South Bridge: ATI SB460, CPU:  Intel Core 2 Duo T7200 2GHz 667FSB PPGA478(Socket M), mainboard CPU Socket: mPGA479m,  RAM: 2 x DDR 2GB 800(@533 max and only about 2.7GB usable), 120GB SATA Hard Disk,IDE DVD writer

Since I can't boot up from USB drive/USB DVD DRIVE although I have chosen the USB devices in BIOS + I can 't boot from DVD+DL as my notebook DVD writer can't read DVD+DL disks, I tried to install Windows 10 64bit in another PC.

In the first restart POST after Windows 10 installation in another desktop PC, I switch off the PC to remove the notebook hard disk from the desktop PC and place it back to my notebook.

If the problematic versions are installed, my notebook will freeze when seeing the blue windows logo+spinning dots circle.

After finishing the full Windows installation in Desktop PC, I remove the hard disk from PC and install the hard disk back into the notebook. After 2 fail startup, during the 3rd startup, auto repair come out with spinning dots circle and it freezes again.

I found that I can not use Windows 10 64bit v1511,1607,1703,1709&1803. I can only use v1507.

I will have the same problem when I am using v1507 and auto update upgrade to v1709. After restart it will remain v1507 and showing update fail. Then it will auto update the new version again and again that making my notebook to freeze again and again!!!

Mounting v1709 ISO in v1507 to upgrade,  after reboot my notebook will freeze when seeing the blue windows logo+spinning dots circle.

Although I have chosen safe mode for next startup in desktop PC and place the hard disk back to the notebook for startup, it won't get into safe mode.

I have tried to use all methods in Fix Windows Update issues which are very time consuming but they did not help at last.