Error code 0xc0000225 after adding old HDD

Anonym
2022-12-11T19:49:45+00:00

So yesterday i installed my old HDD that i used as OS drive before i cloned it with my SSD and removed my HDD. I deleted every partion on my old HDD and reformatted it with no problem. When i went to turn off my pc at the end of the day it wouldnt turn off. It just went back to the lockscreen everytime so i ended up holding the power button (force stop). Today when booting my pc as usual i got the error code 0xc0000225. Tried every solution possible and also tried to remove my old HDD again from my pc since i figured that was the problem, but it didnt do anything other than giving me another error code (0xc000000e)

Mabye since i deleted every partion and reformated my HDD it thinks that is the boot drive or the OS disk still but i have only 1 boot drive option and it is my SSD so i have no idea. The only solution method that i didnt do was the «mark disk as active» one. Since i i couldnt because my drives are formatted another way or something and i have alot of important files on every disk so i dont really want to delete them or reset or anything. Please help, thank you

Windows for home | Windows 10 | Enheter og drivere

Låst spørsmål. Dette spørsmålet ble overført fra Microsofts kundestøttefelleskap. Du kan stemme på om det er nyttig, men du kan ikke legge til kommentarer eller svar eller følge spørsmålet.

0 kommentarer

17 svar

Sorter etter: Mest nyttig
Mest nyttig Nyeste Eldste
  1. Anonym
    2022-12-12T21:13:28+00:00

    Nothing solves it. Allthough what i find interesting is that some of these methods i cant even do like when i type openbcd in cmd and navigate to osdevice it says ramdisk=[unknown]\Recovery\WindowsRE\Winre.wim, {a long id}. But i know i have my os on disk E since when i navigate to it i recognice the files and also when i do the bootrec /scanos commamd it shows up as the only one. Also the long id at the end of osdevice and many others (i assume its the diskid) does not match with any of my disks id. Mabye i can fix it by changing drive e to that id? I also dont have a boot\bcd in my E drive. Now my other hdd says it has 0gb free on disk list whitch i know it doesnt have and my other ssd says foreign om status so i dont really know what more to do other than mabye changing the disk id to the one in osdevice. When i do bootrec /fixboot i have no access. Now i did follow this guide https://www.hardwarecentric.com/0xc000000e-after-clone-windows-10/ and whenever i did the bcdedit /set {default} device boot etc… i got another errorcode saying 0xc000000f file: \windows\system32\config\system. Os could not load because a system registeryfile is missing

    Var dette svaret nyttig?

    0 kommentarer
  2. Igor Leyko 112.4K Omdømmepoeng Uavhengig rådgiver
    2022-12-12T19:27:33+00:00

    Please try to repair a booting using installation media. And see some recovery steps at https://support.microsoft.com/en-us/help/402603... and https://docs.microsoft.com/en-us/windows/client...

    Var dette svaret nyttig?

    0 kommentarer
  3. Anonym
    2022-12-12T16:11:57+00:00

    Hi Aleksander,
    My name is Igor, it's a pleasure for me to help others and I'll do all my best to help you.

    After drive cloning both old and new drives have identical identifiers so system cannot distinguish them sometimes. Partition deleting does not remove drive identifier, one need to clean the drive or change the identifier manually. Seems your partition manipulations confused the system.

    Please use Windows installation media and try to repair your system boot.

    How do i change the drive identifier manually?

    I tried changing the uniqueid in cmd (they didnt have the same id even). But then i got the 0xc000000e code instead so what do i do now

    Var dette svaret nyttig?

    0 kommentarer
  4. Anonym
    2022-12-12T05:46:45+00:00

    Hi Aleksander,
    My name is Igor, it's a pleasure for me to help others and I'll do all my best to help you.

    After drive cloning both old and new drives have identical identifiers so system cannot distinguish them sometimes. Partition deleting does not remove drive identifier, one need to clean the drive or change the identifier manually. Seems your partition manipulations confused the system.

    Please use Windows installation media and try to repair your system boot.

    How do i change the drive identifier manually?

    Var dette svaret nyttig?

    0 kommentarer
  5. Igor Leyko 112.4K Omdømmepoeng Uavhengig rådgiver
    2022-12-11T20:59:30+00:00

    Hi Aleksander,

    My name is Igor, it's a pleasure for me to help others and I'll do all my best to help you.

    After drive cloning both old and new drives have identical identifiers so system cannot distinguish them sometimes. Partition deleting does not remove drive identifier, one need to clean the drive or change the identifier manually. Seems your partition manipulations confused the system.

    Please use Windows installation media and try to repair your system boot.

    Var dette svaret nyttig?

    0 kommentarer