Issue with system restore file extract

Dalton Montgomery 0 Reputation points
2026-11-19T05:26:58.49+00:00

Hello, I've been trying to troubleshoot some crashes I've had on my pc, and when running system restore, I got the following error:

System restore failed to extract the file

(C:\Windows\WinSxS\amd64_microsoft-windows-ie-htmlediting_31bf3856ad364e35_

from the restore point.

An unspecified error occurred during system restore. (0x800701b1)

This is the earliest restore point I have available, and after looking, the file in the error was there, so I'm not sure if it might be corrupted. Unsure of what to do here, or if this is related to my pc crashing. Any help would be much appreciated.

Windows for home | Windows 11 | Recovery and backup

3 answers

Sort by: Most helpful
  1. Alvise Cervellati 7,150 Reputation points Independent Advisor
    2026-11-20T00:06:31.29+00:00

    Ok, check what is the hardware version of your dongle, then download an updated driver from here

    https://www.tp-link.com/us/support/download/archer-t2u-plus/

    Standard Disclaimer: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.

    Was this answer helpful?


  2. AI answer

    2026-11-19T21:44:59.5733333+00:00

    Run System Restore from the Windows Recovery Environment (WinRE) first, because this performs the rollback outside the normal Windows session and avoids interference from running services or drivers.

    1. Retry System Restore from WinRE

    1. Save open work and back up important files.
    2. Hold Shift while selecting Start → Power → Restart.
    3. On Choose an option, select Troubleshoot → Advanced options → System Restore.
    4. Select the restore point and complete the rollback.

    WinRE is included with Windows 11 and supports System Restore, which rolls back system files and settings without rolling back personal files.^1^ A closely matching Windows 11 System Restore failure was resolved by running the rollback from WinRE.^2^

    If BitLocker is enabled, have the recovery key available before entering WinRE.^3^

    2. If WinRE reports the same error, check the storage and file system

    Error 0x800701B1 means “A device which does not exist was specified.”^4^ In this situation, that makes the storage path a priority for investigation; it does not prove that the named WinSxS file is corrupted.

    Disconnect nonessential USB storage, docks, and other external hardware. Then open Command Prompt as administrator and run:

    chkdsk /f C:
    

    Accept the prompt to schedule the check, then restart. Back up important data first: /f repairs file-system errors rather than performing a read-only scan. Microsoft documents this command for repairing drive errors.^5^

    After Windows starts:

    1. Open Device Manager.
    2. Expand Disk drives and Storage controllers.
    3. Look for yellow warning icons.
    4. If one appears, open Properties → Device status, record the displayed code, and obtain the appropriate storage/chipset driver from the PC or motherboard manufacturer.

    Repeated 0x800701B1 errors, disk disappearances, I/O errors, or new crashes justify running the SSD/HDD manufacturer’s health diagnostic and backing up immediately.

    3. Repair Windows components

    The file merely being present under C:\Windows\WinSxS does not establish that its contents or the component store are healthy. Do not manually delete or replace files in WinSxS.

    Open Command Prompt as administrator, then run DISM before SFC:

    DISM.exe /Online /Cleanup-Image /RestoreHealth
    sfc /scannow
    

    DISM repairs the Windows component image used by SFC; SFC then verifies protected system files and replaces damaged copies where possible.^6^

    Interpret the final SFC result as follows:

    • No integrity violations: system-file corruption was not detected.
    • Corrupt files successfully repaired: restart, then retry System Restore from WinRE.
    • Unable to repair some files: preserve the result and consider Windows repair/reinstallation options rather than manually modifying WinSxS.

    About the crashes

    The failed restore and the crashes may share a storage or driver problem, but this error alone does not establish that relationship. Record the exact stop code and any module name shown during the next crash. If disk checks pass but crashes continue, those details are needed to distinguish a storage failure from a device-driver or software problem.

    If the drive diagnostic reports failure or chkdsk reports recurring errors, stop attempting restores, back up the data, and address the drive first. If storage tests pass but WinRE restore still fails, use the least-disruptive applicable recovery option, such as reinstalling the current Windows version where offered, before considering Reset this PC; Microsoft recommends backing up before recovery operations because some options can remove data.^3^


    References

    1. Windows Recovery Environment (Windows RE)
    2. System restore fails because of Intel iCLSClient - Microsoft Q&A
    3. Recovery options in Windows
    4. Utilizing Microsoft Game Development Kit tools to install and launch your PC title
    5. [Windows 11](https://support.microsoft.com/windows/deployment/updates-lifecycle/troubleshoot-problems-updating-windows#repair-hard-drive-errors)
    6. Use the System File Checker tool to repair missing or corrupted system files | Microsoft Support
    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

  3. Alvise Cervellati 7,150 Reputation points Independent Advisor
    2026-11-19T07:30:52.16+00:00

    Hi @Dalton Montgomery

    Could you describe the problems you’ve been having with your PC? Does it show a blue screen, freeze, or restart unexpectedly? Have you seen any specific error messages?

    First, back up your important files to another drive. Since you’re also experiencing crashes, please open Event Viewer > Windows Logs > System and check for disk or storage-controller errors around the time the restore failed. Share any matching entries

    Does the PC show a blue screen, freeze, or suddenly restart? Please also share your Windows version, SSD/HDD model, and whether you ran System Restore from within Windows or the recovery environment

    Let me know

    Elvis

    Was this answer helpful?


Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.