how to fix the finger print

jude shayeb 0 Reputation points
2026-10-22T20:29:04.2966667+00:00

the laptop reset the pin and fingerprint while updating now the fingerprint says setup but when i go set it up it says the fingerprint is familiar no matter what finger i use

Windows for home | Windows 10 | Windows Hello, lock screen and sign-in
0 comments

2 answers

Sort by: Newest
Most helpful Newest Oldest
  1. Lester Bernard Reyes 86,725 Reputation points Independent Advisor
    2026-10-22T21:17:49.0066667+00:00

    Hi, I'm Bernard. I'm happy to help!

    Kindly follow the steps provided in the AI answer. However, if the issue persists, I recommend resetting the Windows Biometrics services by following the steps below:

    Note: This will delete all registered Biometrics on the PC. It's better if you create a backup first.

    Press the Windows key + R, then type in:

    services.msc

    Hit OK and look for Windows Biometric Service. Right-click it, then click Stop

    Once done, open File Explorer and go to: C:\Windows\System32\WinBioDatabase and delete all files inside.

    Note: This will delete all registered Biometrics on the PC. It's better if you create a backup first.

    If the issue persists, I suggest doing an in-place upgrade, which will upgrade the device to the latest version and repair all issues without deleting any files.

     

    Note: Before doing this, make sure to create a restore point: https://support.microsoft.com/en-us/windows/experience/backup-recovery/system-protection

     

    1. Go to this link: https://www.microsoft.com/en-us/software-download/windows10
    2. Select Download Now, and select Run. You need to be an administrator to run this tool.
    3. On the License terms page, if you accept the license terms, select Accept.
    4. On the What do you want to do? page, select Upgrade this PC now, and then select Next.
    5. After downloading and installing, it should fix the issue.

     

    Reference: https://www.microsoft.com/en-us/software-download/windows10

    Was this answer helpful?

    0 comments

  2. AI answer

    2026-10-22T20:29:54.0966667+00:00

    Remove the existing Windows Hello fingerprint enrollment and register it again; if Windows only shows Set up yet reports that every finger is already familiar, reinstall the biometric driver to clear the inconsistent enrollment state.

    1. Remove and re-register the fingerprint

    1. Sign in using the newly created PIN or account password.
    2. Open Start → Settings → Accounts → Sign-in options.
    3. Select Windows Hello Fingerprint.
    4. If Remove appears, select it and restart the laptop.
    5. Return to the same page, select Set up, and enroll one finger.

    During enrollment, place different parts and angles of the same finger on the reader. Microsoft recommends removing and re-registering fingerprints when recognition or enrollment fails.^1^

    If Remove is unavailable because Windows already displays fingerprint as not configured, continue below.

    2. Reinstall the fingerprint-reader driver

    1. Right-click Start and select Device Manager.
    2. Expand Biometric devices.
    3. Right-click the fingerprint reader and select Uninstall device.
    4. Select the option to remove the driver if Windows offers it, then choose Uninstall.
    5. Restart the laptop. Windows should attempt to reinstall the reader.
    6. Return to Settings → Accounts → Sign-in options → Windows Hello Fingerprint → Set up and try enrollment again.

    Driver reinstallation is Microsoft’s documented next step when removing and re-enrolling the biometric entry does not work.^2^

    If the fingerprint reader does not return under Biometric devices, install the Windows 10 biometric driver specifically supplied for the laptop model from its manufacturer. Avoid forcing a driver intended for another model.

    3. If the same “fingerprint is familiar” message remains

    Reset the Windows Hello PIN relationship and restart the biometric service:

    1. Make sure the account password is known before removing the PIN.
    2. Open Settings → Accounts → Sign-in options → Windows Hello PIN.
    3. Select Remove, restart the computer, and add the PIN again.
    4. Open Command Prompt as administrator.
    5. Run:
    net stop wbiosrvc
net start wbiosrvc
    1. Restart Windows and try fingerprint setup again.

    The PIN is required before fingerprint enrollment, and Microsoft documents removing the PIN and restarting the Windows Biometric Service as a later recovery step.^2^ ^3^

    Do not clear the TPM or reset the PC at this stage; those actions can affect credentials or data and are unnecessary until the enrollment and driver repairs have been exhausted.

    Windows 10 support ended on October 14, 2025. If the laptop supports Windows 11, plan an upgrade after resolving access to the device.^4^

    References

    1. Windows Hello common issues and troubleshooting tips | Microsoft Support
    2. Windows Hello Enhanced Sign-in Security
    3. How to use Windows Hello fingerprint when signed in but still require master pin for account sign in. - Microsoft Q&A
    4. [Windows 10](https://support.microsoft.com/surface/setup/troubleshoot-problems-with-windows-hello-on-surface#tips-for-surface-laptop-go-and-windows-hello-fingerprint)
    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.