Windows 10 Feature Update 20H2 consistently fails with 0x80242016 error

Anonymous
2020-12-17T20:42:31+00:00

Feature Update to Windows 10, version 20H2 has failed to installed 43 times.   The message in the "View Update History" indicates "Last failed install attempted on MM/DD/YYY - 0x80242016".

I've tried numerous posted articles to correct the 0x80242016 error to no avail.    Will I've tried various suggestions to delete the the update and download it, windows update trouble shooter, or stopping/starting various services before attempting to reinstall the update.  I have not be able to use the DISM command, with the local source files because I cannot locate the Windows source files on my PC.  Open to ideas and suggestions.

  • What risk to my machine would there be to perform a Windows 10 Update In Place from 1909 to 20H2 (assuming I can download an install the most current version/build)?
  • Would the update in place reuse my current license/activation.
  • Windows10 Update in place KB Article

Windows Specification:

Windows 10 Pro 1909 OS Build 18363.1256 Installed 4/22/2020

Desktop Machine:

Dell T3610, Xeon CPU E5-1620 0 @ 3.60GHz, 32 GB RAM

1.09 TB free on a 2TB Drive

Thank you - Community

Windows for home | Windows 10 | Windows update

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer recommended by moderator
Anonymous
2021-03-04T15:01:25+00:00

I have the same problem induced by transfering the windows10 from HDD to SDD disk, during the transfer the WinRE partition was lost!

To repair Bootloader, you should prepare a Windows 10 installation disc.

Step 1. Boot from Windows 10 installation disc and press any key to continue.

Step 2. Then navigate to Repair your computer->Troubleshoot->Advanced options->Command Prompt.

Step 3. Type diskpart in the command prompt.

Step 4. Type the following command and press Enter after each command.

List disk
Sel disk 0 (where 0 stands for the boot drive)
List vol (note which volume is the EFI partition, mine is 4)
Sel vol 4
assign letter=N:
Exit
Step 5. Type N: (the drive letter you just assigned and hit Enter.)

Step 6. After you have assigned a drive letter Using Diskpart, you can format the EFI partition using the following command.

format N: /FS:FAT32(type the label of the volume, my is SYSTEM)

Step 7. Now, type bcdboot C:\windows /s N: /f UEFI and hit Enter. This command will repair your Bootloader.(My windows are located in D:\windows)

Then try the bootrec /fixboot command again, fixboot access denied in Windows 10 could be solved.

Was this answer helpful?

2 people found this answer helpful.
0 comments

75 additional answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2021-03-03T15:55:02+00:00

    Hi SMWoodruff

    I suppose my PC is suffering from the same problem. What have you done in detail to fix your Boot Data Store?

    Thanks in advance.

    Was this answer helpful?

    0 comments
  2. Anonymous
    2021-03-03T03:02:55+00:00

    Read the below post I created and see how I resolve the Windows 10 update error. If you have similar problem, you can create a new post and the community have a lot of expert engineer assist you :

    Windows 10 update error : 0x80242016 - Microsoft Community

    Was this answer helpful?

    0 comments
  3. Anonymous
    2021-03-02T23:23:42+00:00

    Can you please detail exactly what the suggested commands and steps were?

    Thanks!

    Was this answer helpful?

    0 comments
  4. Anonymous
    2021-02-21T01:11:19+00:00

    My issue was resolved by correcting several parameters in my BDS (boot data store). Incorrect paths and setting would not allow the Windows Recovery Environment to work which was needed to install the 20H2 feature update.

    Your error seems to be a different underlying issue. I’d suggest that you create a new post with your specific logs. The community was very helpful. I just was fortunate to get good advise after several tries.

    I hope you have good results.

    Was this answer helpful?

    0 comments