having trouble setting up microsoft authenticator

Seaberry Lansford 0 Reputation points
2026-11-18T13:28:46.2866667+00:00

I'm trying to set up microsoft authenticator for my work account, but I can't get past the QR code step. I've scanned the code with my phone, but the app doesn't seem to complete the setup, and my account keeps showing as not registered. I've tried restarting the setup a couple of times, but no luck so far.

Microsoft Security | Microsoft Authenticator
0 comments No comments

2 answers

Sort by: Newest
  1. Alina Le 5,985 Reputation points Independent Advisor
    2026-11-18T14:15:42+00:00

    Hello Seaberry Lansford

    Could you please try again and let me know exactly where you're getting stuck in the setup process?

    • Is the account missing after you've scanned the QR code?
    • Is the QR code not loading or not scanning properly?
    • Are you seeing any error messages?

    After scanning the QR code, you should normally receive a notification from the Authenticator app asking you to enter the two-digit number shown on your computer screen. Please make sure notifications are enabled for the app so you can complete this verification step.

    If possible, please send me a screenshot of the screen where the issue occurs (please removing all personal information before posting it in this public forum), and I'll be happy to take a closer look.

    For your reference: How to add your accounts to Microsoft Authenticator

    Kind regards,

    Was this answer helpful?


  2. AI answer

    2026-11-18T13:29:00.1+00:00

    If the QR code scans but the account still shows as not registered, the setup is usually incomplete rather than fully added.

    Try this sequence:

    1. In the Authenticator app, make sure the app has camera permission. If camera access was denied, the QR code can be added manually by selecting Can't scan the QR image on the setup page and entering the code and URL manually.
    2. After scanning the QR code, select Next on the computer’s Scan the QR code page. The setup is not complete until the test notification is sent and approved in the Authenticator app.
    3. Approve the notification in Microsoft Authenticator, then select Next again so the security info is updated.
    4. If prompted, complete the phone setup step by choosing text message or phone call, enter the verification code, and finish the wizard with Done.

    If the account still appears as not registered, check these common causes in Authenticator:

    1. Update Authenticator to the latest version. Versions older than 12 months are not supported.
    2. In Authenticator, go to Settings and make sure:
      • App updates is turned on
      • Turn off battery optimization is enabled
      • Notification Settings > Show notifications is turned on
    3. Make sure the device has network connectivity. If using mobile data, try Wi-Fi, and vice versa. Make sure Airplane mode is off.
    4. Make sure the device date and time are correct and the device is fully up to date.
    5. If using a VPN, disconnect it and try again.

    If the app shows the account but it still does not complete registration, that can indicate the Authenticator setup is incomplete. In that case:

    1. On the sign-in page, use Sign in another way if another verification method is available.
    2. After access is restored, go to Security info and add Microsoft Authenticator again, then complete the QR scan and approval flow.
    3. If no other sign-in method works, contact the organization’s IT admin and ask for an MFA re-registration reset. The accepted guidance for this scenario is to have the admin require MFA re-registration.

    If repeated sign-in attempts were made during setup, Microsoft Entra multifactor authentication can temporarily block more attempts. Wait and try again later, or use a different MFA method if available.


    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.