電腦頻繁藍屏

Lol, It's really being used. So when I turn the driver verifier on, the computer will go to BSOD immediately before entering the login screen. With code System thread exception not handled.

but I'm now trying to run memtest 64 for more time to ensure there actually no faulty ram

Use this method to disable Driver Verifier, then check if there are any new minidump files that you can upload for analysis.

Start your PC, just as Windows attempts to load (spinning dots), press and hold Power Button for 5 - 10 seconds to perform a Hard Shut Down

Do this twice

On the third start Windows will boot into the Recovery Environment and from there you can access System Repair, Safe Mode, Command Prompt... etc.

Go to Troubleshoot - Advanced Option - Startup Settings and click Restart

Upon restart, press 4 to enter Safe Mode

Open Command Prompt as Administrator and run these two commands, then restart your PC.

verifier /reset

verifier /bootmode resetonbootfail

Sorry but I have already do an recover through restore point,shall I turn that on again?

Can you now get into Windows and have you checked if there is any new minidump files created by Driver Verifier?

But when I'm doing memtest64 again and I got two BSOD, one happens randomly and one happens when start of the test. But when after I go through 30mins of memtest, nothing happens. So here's the dmp files, thank you so much for helping me!

https://drive.google.com/drive/folders/1EmL2WYoVjjE18C7VvrmG7457qJdNkrYm?usp=drive_link