出現畫面如下:
A problem has been detected and windows has been shutdown to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer, if this screen appear again, follow these steps:
Run a system diagnostic utility supplied by your hardware manufacturer. In particular, run memory check, and check for faulty or mismatched memory.
Try changing video adapters.
Disable or remove any newly installed hardware and drivers.
Disable or remove any newly installed software.
If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup options, and then select safe mode.
Technical informations:
***Stop: 0X0000007F (0X0000000000000008, 0X0000000080050031,
0X0000000000000F8, 0XFFFFF80004111838)
Collecting data for crash dump…
Initialzing disk for crash dump…
Beginning dump of physical memory.
Dumping physical memory to disk: 100.
Physical memory dump complete.
Connect your system admin or technical support group for further assistance.
問題簽章
問題事件名稱:
Bluescreen
作業糸統版本:
6.1.7600.2.0.0.768.3
地區設定識別碼:
1028
與問題相關其它資訊
BCCode
7f
BCP1
0000000000000008
BCP2
0000000080050031
BCP3
00000000000006F8
BCP4
FFFFF80004111838
OS Version
6_1_7600
Service Pack
0_0
Product
768_1
最近檔機次數頻繁,每天早上一開機就發生,有時候開好機,點選某個程式又檔了,多數時間我選「正常起動」又Ok了,有時照電腦指示選「修護電腦」放上光碟片,但最後得到結果是「電腦無法修護」真不知要如何處理? 希望微軟工程師們能幫我解决問題,先謝謝您們囉!