一样的问题, 这么久微软都没解决吗? 至少给个答复吧.
更新Win10 22H2 2023-07 累积更新补丁 (KB5028166) 后,所有网络适配器均无法正常工作
23/7/13 8:26 UTC updated :
此问题已提交至 Windows 反馈中心(英文),如果社区内有遇到同样问题的用户看到此提问,可以对下面链接中的反馈进行赞成,并提供更多问题相关信息,这也许有助于工程师发现并更快解决问题。
反馈 URL :https://aka.ms/AAlirh8
This issue has been submitted to the Windows Feedback Hub (English). If any users in the community who encounter the same issue see this question, you can agree with the feedback in the link above and provide more information related to the issue. This may help Microsoft engineers solve the problem faster.
Original question :
在Windows 10 家庭版 22H2 更新安装 KB5028166 (操作系统内部版本号 19045.3208) 补丁后,所有网络适配器(有线&无线)均无法正常工作,疑难解答显示 “Windows 无法自动将IP协议堆栈绑定到网络适配器”;而另一台尚未更新的电脑处在同一网络下正常,重启更新后出现同样问题 。尝试重置网络选项无效。
后尝试卸载该累积更新补丁,网络适配器恢复正常工作;再次尝试安装该补丁后,回到前述状态。
此问题已在我的两台运行Win10 家庭版 22H2 的电脑上分别反复尝试复现并验证,确认该补丁的安装是导致问题的唯一直接因素。希望得到帮助,可以配合提供信息以解决问题。
Windows Feedback Hub : https://aka.ms/AAlirh8
After installing KB5028166 (OS Build 19045.3208) in Windows 10 Home Edition, all network adapters (wired&wireless) experienced exceptions. The troubleshooter displays 'Windows couldn't automatically bind the IP protocol stack to the network adapter'. Network reset cannot solve it.
After uninstalling the update "KB5028166", the network returned to normal. But once installed again, it will return to the previous state.
This issue has been repeatedly tested and verified on two computers running Windows 10 Home Edition. Hope to receive assistance, I can cooperate with the engineer's investigation.
Windows 家庭版 | Windows 10 | Windows 更新
锁定的问题。 此问题已从 Microsoft 支持社区迁移。 你可投票决定它是否有用,但不能添加评论或回复,也不能关注问题。
-
匿名
2023-08-14T06:14:34+00:00 -
匿名
2023-07-15T05:00:17+00:00 版本 Windows 10 专业版
版本号 22H2
安装日期 2020-12-27-周日
操作系统内部版本 19045.3086
同样在此版本下更新KB5028166,网卡和网卡驱动在更新前是正常工作的,更新后适配器完全没有获取信息,无法正常工作
重复尝试3次安装和卸载该更新,100%复现这个bug,希望官方立即停止该更新推送、排查问题所在并修复
-
匿名
2023-07-15T02:57:34+00:00 Windows 10 64专业版 22H2 19045.3086,遇到一样的问题,更新KB5028166之后就断网,不是网卡驱动的问题,更新后系统的网卡的网关就消失了,而且无法添加,导致无法上网,所以必须卸载更新,网卡网关才能恢复。
-
匿名
2023-07-13T14:22:51+00:00 我也遇到了问题,昨天关机并更新,今天开机一直开不了,最后还原点还原才开机,然后更新KB5028166重启几次还是显示等待重启,不知道今天关机明天是不是又开不了机。
-
匿名
2023-07-13T07:45:01+00:00 感谢回复,
社区没有反馈的特殊渠道。
可以打开系统中的 反馈中心,提交一下这个问题,这将有助于产品的改进。
(反馈后,可以让遇到同样问题的网友投票)
若是有任何疑问,可以在48小时内点击我回复下面的“回复”按钮进行回复。否则,我将无法再收到回复提醒。