issue on formatting a usb flash drive

Anonim
2023-08-21T19:43:16+00:00

i tried formatting my bootable 128 gb flash drive on file manager and i did it but after to format it second time but this time via settings >manage disks and units i get error when i do this steps i delete the unit and create again file system exfat and allocation unit size (4kb by default) i create it without problem but in next step if i want to format it on the same interface shows a error massage formatting - failed error code 0x8

also allocation unit sizes vary between file manager format and settings manage disks and units, i dont know if its somehow matter

(bytheway i use a different languge all above my expressions hope they all correct.)

Windows Ev | Windows 11 | Cihazlar ve sürücüler

Kilitli Soru. Bu soru Microsoft Destek Topluluğu’ndan aktarıldı. Yararlı olup olmadığını belirtmek için oy verebilirsiniz ancak yorum veya yanıt ekleyemez ya da soruyu takip edemezsiniz.

0 yorum

17 yanıt

Sıralama ölçütü: En Eski
En yararlı En Yeni En Eski
  1. Anonim
    2023-08-22T19:36:52+00:00

    This is

    Bu yanıt yardımcı oldu mu?

    0 yorum
  2. Anonim
    2023-08-23T06:03:46+00:00

    Please share the screenshot as I am unable to view the link the you have provided it is access denied

    Bu yanıt yardımcı oldu mu?

    0 yorum
  3. Anonim
    2023-08-23T06:36:53+00:00

    hope i did it

    Bu yanıt yardımcı oldu mu?

    0 yorum
  4. Anonim
    2023-08-23T07:18:09+00:00

    It's still access denied. Any way you may I ask if you already have tried this steps below?

    1. Press Windows icon, type "CMD" then Right-click on "Command Prompt" in the Start menu and select "Run as administrator".
    2. Type diskpart and press Enter. This will open the DiskPart utility, which allows you to manage drives.
    3. In the DiskPart prompt, type list disk and press Enter. This will display a list of all available disks on your computer.
    4. Identify your flash drive from the list based on its size and other attributes. Note the number associated with the flash drive (e.g., Disk 2). Type select disk X (replace X with the correct number) and press Enter.
    5. To remove all existing partitions and data on the flash drive, type clean and press Enter. This will wipe the drive.
    6. Type create partition primary and press Enter. This will create a new primary partition on the drive.
    7. Type select partition 1 and press Enter. This selects the newly created partition.
    8. To format the partition, use one of the following commands based on the file system you want to use:

    For NTFS: Type format fs=ntfs quick and press Enter.

    For FAT32: Type format fs=fat32 quick and press Enter.

    1. Type exit and press Enter to exit the DiskPart utility.
    2. You can now close the Command Prompt window.

    Bu yanıt yardımcı oldu mu?

    0 yorum
  5. Anonim
    2023-08-23T08:17:21+00:00

    this is screenshot google drive link if you want , interface is in turkish but i create another topic for this thing also someone else there because it seems a bug . (edit: link is deleted)

    Bu yanıt yardımcı oldu mu?

    0 yorum