Windows Boot Manager blocked after restoring Secure Boot Factory Keys on Lenovo Legion 5 15ACH6

Arissara Kaewla 0 แต้มความนิยม
2026-11-01T20:04:45.9433333+00:00

Hello,

I am using a Lenovo Legion 5 15ACH6 with Windows 11.

I initially just wanted to play a game that required Secure Boot, but the game could not detect it. I therefore entered the BIOS settings and tried enabling and disabling Secure Boot. I then selected "Restore Factory Keys" to restore the default Secure Boot keys.

After that, I started experiencing a boot problem.

Every time I try to boot Windows, the following error appears:

"Windows Boot Manager has been blocked by the current security policy."

The system cannot boot into Windows normally. Even after pressing OK, the same error appears again. It also displays:

  • EFI PXE 0 For IPv4 boot failed.
  • Default Boot Device Missing or Boot Failed.

BIOS information:

  • Boot Mode: UEFI
  • Platform Mode: Setup Mode
  • Secure Boot Status: Disabled
  • Secure Boot Mode: Custom
  • BIOS Version: HHCN37WW

BitLocker: Fully Decrypted / Protection Off.

How can I fix this issue and restore normal Windows boot functionality without losing my personal files or reinstalling Windows?

Could this be caused by Secure Boot keys, Platform Key (PK), or UEFI boot configuration?

Thank you.

Windows สำหรับการใช้งานที่บ้าน | Windows 11 | ประสิทธิภาพและความล้มเหลวของระบ
0 ความคิดเห็น ไม่มีข้อคิดเห็น

1 คำตอบ

เรียงลำดับตาม: มีประโยชน์มากที่สุด
  1. Ivan B 127.6K แต้มความนิยม ที่ปรึกษาอิสระ
    2026-11-01T23:33:39.7966667+00:00

    Hi,

    First, you will need to disable Secure Boot, and then you will update the BIOS.

    Please keep in mind that while a BIOS update is recommended, it does carry risks. If the process is interrupted, your laptop may fail to boot. Therefore, if you lack experience with hardware and software, I suggest skipping this step—though, again, it is highly recommended.

    To update the BIOS, you must first disable BitLocker. To do this, open the Command Prompt (as an administrator) and run the following command: manage-bde -off C:. Wait for the decryption process to complete, then restart your computer.

    After that, you can download the BIOS via the link below:

    https://pcsupport.lenovo.com/en/us/products/laptops-and-netbooks/legion-series/legion-5-15ach6/downloads/driver-list/component?name=BIOS&id=5AC6A815-321D-440E-8833-B07A93E0428C

    For instructions on how to perform the BIOS update, see: https://pcsupport.lenovo.com/br/en/products/laptops-and-netbooks/legion-series/legion-5-15ach6/solutions/ht500008

    Once the BIOS has been updated, verify that CSM is disabled and ensure that "Windows Boot Manager" is present in the boot options.

    If it is, boot into Windows once, then return to the BIOS, enable Secure Boot in "Setup Mode," and restore the keys.

    Check whether the system boots; if it does not, we will need to update the keys manually.

    While this is not a Microsoft website, it is the official site of [Legion 5 15ACH6/Lenovo].

    Thanks

    คำตอบนี้มีประโยชน์หรือไม่

    0 ความคิดเห็น ไม่มีข้อคิดเห็น

คำตอบของคุณ

คำตอบสามารถทำเครื่องหมายว่า “ยอมรับ” โดยผู้เขียนคำถาม และ “แนะนำ” โดยผู้ดูแลระบบ ซึ่งจะช่วยให้ผู้ใช้ทราบว่าคำตอบนั้นแก้ไขปัญหาของผู้เขียนได้