Windows 10 BSOD unexpected store exception and error 0xc00000e

Anonimowe
2022-08-07T20:03:11+00:00

Hello, because I don't know what i can do more i need help. As title says i'm keep getting BSODs after a significant amount of time or after some time after closing a game. The problem with unexpected store exception BSOD is pretty new but I was dealing with error 0xc00000e before. As it turned out my sata cable went loose so now it should be all ok. I don't really know how to describe it more precisely. Just after closing a game or playing longer the same game my computer completly freezes and I'm just waiting to see the BSOD. For now i tried to deal with it on my own but I don't know what to do more. I tried with sfc /scannow to see if maybe windows will repair it, I updated all my drivers (used drivereasy to show me drivers that needs an update), used the windows memory diagnostic test (mdsched.exe everything was ok) and i checked the sata cables to be sure that they were not loose.

PC specs:

Motherboard: b450 tomahawk max

Processor: Ryzen 7 2700x

Graphic: GTX 1060 6gb

Ram: 2x8gb Patriot 3200MHz CL16 Viper 4
SSD: Samsung 250gb evo 850
HDD: Seagate Barracuda 2TB ST2000DM008

Power supply: i'm sorry but i don't remember

Thanks for your time and any help.

ps. sorry if my english was hard to understand i'm pretty tired of this.

Windows dla domu | Windows 10 | Wydajność i błędy systemu

Pytanie zablokowane. To pytanie zostało zmigrowane ze społeczności pomocy technicznej firmy Microsoft. Możesz zagłosować, czy pytanie jest pomocne, ale nie możesz dodawać komentarzy ani odpowiedzi, ani też śledzić pytania.

Komentarze: 0
Odpowiedź zaakceptowana przez autora pytania
DaveM121 937.9K Punkty reputacji Niezależny doradca
2022-08-10T13:34:23+00:00

Hi grracz24,

Thank you for the screenshot, it seems Windows was re-installed before and the boot partition is not on the same drive as Windows is installed on.

When re-installing Windows, there is a known bug, you must disconnect any other drive temporarily leaving only the target drive connected, that will force the Windows installation to create a new boot (EFI) partition on the system drive.

Czy ta odpowiedź była pomocna?

1 osoba uznała tę odpowiedź za pomocną.
Komentarze: 0

Dodatkowe odpowiedzi: 25

Sortuj według: Najnowsze
Najbardziej pomocne Najnowsze Najstarsze
  1. DaveM121 937.9K Punkty reputacji Niezależny doradca
    2022-08-09T19:58:15+00:00

    Hi grracz24,

    Those minidump files do not indicate driver verifier was enabled and they just list memory (RAM) corruption.

    Czy ta odpowiedź była pomocna?

    Komentarze: 0
  2. Anonimowe
    2022-08-09T19:49:08+00:00

    I did this
    there are minidump files

    https://www111.zippyshare.com/v/drNjK36g/file.html

    at 3rd time my computer completly freezes and showed me bunch of errors "the instruction at 0x000000010E9B340 referenced memory at 0x00... The required data was not placed into memory because of an I/O error status of 0xc000000e." and i did not get a BSOD.
    Thank you for your time i will check anything you reply tommorow.

    Edit. while Windows attempted to load it tried to scan my disks, which I skipped.

    Czy ta odpowiedź była pomocna?

    Komentarze: 0
  3. DaveM121 937.9K Punkty reputacji Niezależny doradca
    2022-08-09T18:37:59+00:00

    Hi grracz24,

    Those new minidump files just indicate memory (RAM) corruption no specific driver is listed

    To try to force Windows 10 show any faulting drivers, the best option would be to turn on Driver Verifier, let your PC crash 3 times, then you must turn off Driver Verifier, and finally, upload any newly created minidump files

    https://answers.microsoft.com/en-us/windows/for...

    Note, if you have any difficulty getting into Windows with Driver Verifier enabled:

    Start your PC, just as Windows attempts to load (spinning dots), press and hold Power Button for 5 - 10 seconds to perform a Hard Shut Down

    Do this twice

    On the third start Windows will boot into the Recovery Environment and from there you can access System Repair, Safe Mode, Command Prompt... etc.

    Go to Troubleshoot - Advanced Option - Startup Settings and click Restart

    Upon restart, press 4 to enter Safe Mode

    Open Command Prompt as Administrator and run these two commands, then restart your PC.

    verifier /reset

    verifier /bootmode resetonbootfail

    Czy ta odpowiedź była pomocna?

    Komentarze: 0
  4. Anonimowe
    2022-08-09T18:29:17+00:00

    Czy ta odpowiedź była pomocna?

    Komentarze: 0