Intel PTT AIK Certificate Enrollment Fails with HTTP 404 – Call of Duty Secure Attestation Wizard Cannot Generate Key

ヒロキ ナガヨシ 0 評価のポイント
2026-10-21T22:32:49.72+00:00

Hello,

I am experiencing an AIK certificate enrollment failure that prevents the Call of Duty Secure Attestation Wizard from generating its required key.

System configuration

Motherboard: MSI PRO Z790-P WIFI

CPU: Intel Core i5-12600K

Operating system: Windows 11 Pro

TPM: Intel PTT, TPM 2.0

TPM manufacturer version: 600.18.35.2557

BIOS: MSI BIOS A.K0 (updated August 19, 2026)

Secure Boot: Enabled

TPM status: Ready for use

Symptoms

The Call of Duty Secure Attestation Wizard reports that TPM 2.0 and Secure Boot pass, but key generation fails.

TpmDiagnostics.exe GetWindowsAIKCert returns:

No Windows AIK Cert is installed.

Running the following command from an elevated Command Prompt:

certreq -enrollaik -config ""

returns HTTP 404 with error 0x80190194:

The authority "``[PII Masked by MSFT Moderator]``" does not exist.

The request is directed to the following SCEP endpoint:

https://INTC-KeyId-``[PII Masked by MSFT Moderator]``.net/templates/Aik/scep

The TPM EK certificate and Intel PTT certificate chain are present. I extracted the three Intel intermediate certificates from the TPM NV index and imported them into the Local Computer Intermediate Certification Authorities store, but TpmDiagnostics.exe ekchain still reports Trust dwErrorStatus:0x10000.

The BIOS is updated, and TPM 2.0 and Secure Boot are enabled. The AIK certificate remains unavailable.

Request

Could Microsoft investigate why the AIK SCEP endpoint returns HTTP 404 stating that the authority does not exist?

Please confirm whether this is an Azure AIK attestation service-side issue, an unsupported Intel PTT endorsement key certificate chain, or a local TPM/Windows configuration problem.

I would appreciate an official, supported resolution. I would prefer not to clear the TPM, change Secure Boot keys, or reinstall Windows unless Microsoft confirms that these actions are necessary.

Thank you.

ビジネス向け Windows | IT プロフェッショナル用 Windows クライアント | デバイスと展開 | その他
0 件のコメント コメントはありません

1 件の回答

並べ替え方法: 新しい順
  1. Daphne Huynh (WICLOUD CORPORATION) 2,620 評価のポイント Microsoft 外部スタッフ モデレーター
    2026-10-22T03:20:58.9066667+00:00

    Welcome to Microsoft Q&A!

    Note: This is the 日本語 ‏ (ja-jp) forum. I kindly recommend posting your question in Japanese, as this will make it easier for other forum members and subject matter experts to engage with your inquiry. If you prefer to post in English, you may also consider using the English forum, where a larger English-speaking audience can review and respond to your question. Thank you for your understanding.

    Thank you for taking the time to provide such detailed diagnostic information.

    Based on the information you provided, I would not recommend clearing the TPM, changing the Secure Boot keys, or reinstalling Windows at this stage.

    Your results show that the TPM is present and ready, Secure Boot is enabled, and the AIK enrollment request reaches the Microsoft AIK SCEP endpoint. However, the following command:

    certreq -enrollaik -config ""
    returns:
    0x80190194 / HTTP 404 - "The authority ... does not exist."
    

    The Endorsement Key (EK) is created by the TPM manufacturer and that an EK certificate, when present, is also issued by the manufacturer. A certification authority establishes trust in the TPM through the EK public key or EK certificate. The attestation process therefore depends on establishing trust in the TPM before an attested certificate can be issued.

    Given the specific HTTP 404 response from the AIK endpoint, the appropriate next step I recommend you is to open an official Microsoft Support case so that this AIK enrollment failure can be investigated further.

    I understand that you are specifically asking Microsoft to investigate why this AIK authority returns HTTP 404. Unfortunately, Microsoft Q&A is a public technical community forum, so this type of service-side investigation cannot be performed through the forum. While I can help review the diagnostic information and explain documented Windows and TPM behavior, I do not have access through Microsoft Q&A to the backend information required to verify the status of this specific AIK authority or inspect the corresponding server-side transaction.

    When opening the support case, I recommend including the information you have already collected:

    • Complete output from certreq -enrollaik -config ""
    • The failing authority: intc-keyid-**.microsoftaik.azure.net
    • TPM/EK certificate chain information
    • TpmDiagnostics.exe AIK and EK-chain results
    • TPM manufacturer and firmware version
    • MSI BIOS version
    • Relevant CertificateServicesClient-CertEnroll events, including timestamps and request IDs if available

    This information will help Microsoft Support investigate the failure and determine whether it is related to the AIK service, recognition of the Intel PTT endorsement certificate hierarchy, or another condition affecting AIK enrollment.

    For this reason, I also would not consider Trust dwErrorStatus: 0x10000 by itself sufficient evidence to conclude that the Intel certificate chain is the root cause. The key unresolved question is why the requested AIK authority is returning "authority does not exist." Determining that requires investigation beyond the client-side information available in a public forum.

    Therefore, opening an official Microsoft Support case is the recommended path. This will allow the issue to be investigated through the appropriate support channels rather than asking you to repeat potentially disruptive troubleshooting without first establishing the cause.

    I hope this helps clarify both the next step and why this investigation cannot be completed directly through Microsoft Q&A.

    References:

    TPM attestation overview for Azure | Microsoft Learn

    TPM Key Attestation | Microsoft Learn

    Request and Renew AD CS Certificates - Windows Server | Microsoft Learn Certificate Enrollment and Renewal - Training | Microsoft Learn

    If you find it useful, please click Accept Answer.

    Thank you for choosing Microsoft Q&A.

    この回答は役に立ちましたか?

    0 件のコメント コメントはありません

お客様の回答

質問作成者は回答に "承認済み"、モデレーターは "推奨" とマークできます。これにより、ユーザーは作成者の問題が回答によって解決したことを把握できます。