HPE Hyperx Cloud Revolver Microphone stuck on Tape Recorder Quality

Névtelen
2024-01-23T10:18:49+00:00

Hello,

I have a HP HyperX Cloud Revolver 7.1 headset. I am running Windows 11 Pro 23H2 (22631.3007).
My motherboard: ASUS ROG Strix B650E-F Faming Wifi (Firmware version: 2214)
My CPU: AMD Ryzen 9 7950X3D 16-Core Processor

The problem is that headsets microphone quality is Tape Recorder Quality.

I installed all the Windows updates and motherboard drivers. Please give advice to solve this issue. Thank you so much.

Windows otthoni használatra | Windows 11 | Eszközök és illesztőprogramok

Zárolt kérdés. Ez a kérdés a Microsoft támogatási közösségéből lett áttelepítve. Szavazhat arról, hogy hasznos-e, de nem adhat hozzá megjegyzéseket vagy válaszokat, és nem követheti a kérdést.

0 megjegyzés Nincsenek megjegyzések
A kérdés szerzője által elfogadott válasz
Ivan B 127.1K Hírnévpontok Független tanácsadó
2024-01-24T14:40:50+00:00

Hi ,

Unfortunately, in this case it would be a hardware problem, I just wish you luck and have a good week with the Microsoft community.

Hope this helps.

If you find the answer helpful, please mark it as an answer.

Independent Advisor - Community

Thanks

Hasznos volt ez a válasz?

Ezt a választ 1 személy találta hasznosnak.
0 megjegyzés Nincsenek megjegyzések

6 további válasz

Rendezés alapja: Legújabb
  1. Névtelen
    2024-01-24T08:02:26+00:00

    I have got only macbook not windows pc. I will send back to the shop and give a try for an another type of headset.

    Thank you very much your help!

    Hasznos volt ez a válasz?

    0 megjegyzés Nincsenek megjegyzések
  2. Ivan B 127.1K Hírnévpontok Független tanácsadó
    2024-01-23T17:35:26+00:00

    Hi ,

    If possible, test the headphone on another computer to see if it has the same HyperX driver.

    Independent Advisor - Community

    Thanks

    Hasznos volt ez a válasz?

    0 megjegyzés Nincsenek megjegyzések
  3. Névtelen
    2024-01-23T15:59:49+00:00

    Hello,

    Thank you so much.

    Unfortunately this software did not recognize my HyperX Cloud Revolver.

    Have you got any other idea?

    Hasznos volt ez a válasz?

    0 megjegyzés Nincsenek megjegyzések
  4. Ivan B 127.1K Hírnévpontok Független tanácsadó
    2024-01-23T13:47:31+00:00

    Hi ,

    Download the driver, I hope it works as a last resort, you need to see the firmware, but it is not available on the HyperX website, contact HyperX to see the firmware.

    https://d1z8x2chb1ujcd.cloudfront.net/software-...

    Note: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.

    Hope this helps.

    If you find the answer helpful, please mark it as an answer.

    Independent Advisor - Community

    Thanks

    Hasznos volt ez a válasz?

    0 megjegyzés Nincsenek megjegyzések