Microsoft Teredo tunnelointisovitin

Anonyymi
2019-11-13T09:15:47+00:00

Pöytäkoneeni ilmoittaa, että Teredo tunnelointisovitin pitää päivittää. Käyttöjärjestelmä on Windows 7 Pro. Mistä tuon löytää ja onko tuo kovin tarpeellinen. Kaikki tuntuu toimivan normaalisti.

Windows kotikäyttäjille | Edelliset Windows-versiot | Laitteet ja ohjaimet

Lukittu kysymys. Tämä kysymys on siirretty Microsoft-tukiyhteisöstä. Voit äänestää sen hyödyllisyydestä mutta et voi lisätä kommentteja tai vastauksia tai seurata kysymystä.

0 kommenttia Ei kommentteja

1 vastaus

Lajitteluperuste: Hyödyllisin
  1. Anonyymi
    2019-11-13T11:32:21+00:00

    Wow. Mikähän tää on. Mä tätä wikipedian sivua luin eikä se heti auennut:

    https://en.wikipedia.org/wiki/Teredo\_tunneling

    Jotain IPv6-härpäkettä? Lähinnä huvitti että tuolla oli

    "Bits 64 to 79 hold some flags and other bits; the format for these 16 bits, MSB first, is "CRAAAAUG AAAAAAAA"."

    Eli tunnelointiprotokolla joka huutaa!

    "6to4, the most common IPv6 over IPv4 tunneling protocol, requires that the tunnel endpoint have a public IPv4 address. However, many hosts currently attach to the IPv4 Internet through one or several NAT devices, usually because of IPv4 address shortage. In such a situation, the only available public IPv4 address is assigned to the NAT device, and the 6to4 tunnel endpoint must be implemented on the NAT device itself. Many NAT devices currently deployed, however, cannot be upgraded to implement 6to4, for technical or economic reasons.

    Teredo alleviates this problem by encapsulating IPv6 packets within UDP/IPv4 datagrams, which most NATs can forward properly. Thus, IPv6-aware hosts behind NATs can serve as Teredo tunnel endpoints even when they don't have a dedicated public IPv4 address. In effect, a host that implements Teredo can gain IPv6 connectivity with no cooperation from the local network environment.

    In the long term, all IPv6 hosts should use native IPv6 connectivity. The temporary Teredo protocol includes provisions for a sunset procedure: Teredo implementation should provide a way to stop using Teredo connectivity when IPv6 matures and connectivity becomes available using a less brittle mechanism. As of IETF89, Microsoft plans to deactivate their Teredo servers for Windows clients in the first half of 2014 (exact date TBD), and encourage the deactivation of publicly operated Teredo relays."

    Eli siis jos mä nyt tosta ymmärrän, niin tää on palikka, jolla voit lähettää IPv6 liikennettä IPv4 verkon yli. Eli jos sulla on vanhaa verkkorautaa, mutta joku sun softa vaatii IPv6:sta toimiakseen, niin tää Teredo sit ilmeisesti toimii välikerroksena? Mä itse lähtisin TechNetistä kyseleen, jos mä välttämättä haluaisin tietää.

    Onko tästä vastauksesta hyötyä?

    1 henkilö piti tätä vastausta hyödyllisenä.
    0 kommenttia Ei kommentteja