If the laptop stays at 0% after 6 hours, the charger light is on, and the battery still does not charge, start with these checks:
- Try a different wall outlet.
- Make sure all charging cable connections are fully seated.
- If the charger has a USB charging port, make sure nothing is plugged into it.
- Disconnect accessories that draw power and check whether charging starts.
- Confirm the charger meets the device’s charging requirements. A charger that is not compatible or not powerful enough can power the PC but still fail to charge the battery.
- If charging through USB-C, make sure the cable is connected to the actual charging USB-C port, not through a hub or dock. Use the charger and cable that came with the device if available.
- If using USB-C, clean the USB-C port with compressed air. Dust or dirt can prevent proper contact.
- Restart the PC: Start > Power > Restart.
If Windows shows plugged in, not charging, a common next step is to reinstall the battery driver:
- Plug in the device.
- Open Device Manager.
- Expand Batteries.
- Right-click the battery entry and choose Uninstall device.
- In Device Manager, select the computer name at the top.
- Select Action > Scan for hardware changes.
Warning: on Surface Pro X, do not uninstall the battery driver. That device may require a full reset to restore drivers.
If the battery is still not detected or the PC turns off immediately when unplugged, that points to a battery or charging hardware issue. For Surface devices, if Windows shows Battery not detected or the device only runs while plugged in, service is recommended.
- Surface battery won’t charge or Surface won’t run on battery | Microsoft Support
- Surface battery won’t charge or Surface won’t run on battery | Microsoft Support
- [Windows 11](https://support.microsoft.com/windows/hardware/usb/fix-usb-c-problems-in-windows)
- PC is charging slowly or discharging while it’s plugged in | Microsoft Support