My Poly V 4230 headphones refuse to connect to my computor even though that very same day they had connected to the same computer 1 hour before incident.

Jacob 0 Reputation points
2026-11-22T22:06:39.5866667+00:00

My modle is a Poly V4230 and the issue is that it won't power off and won't connect to my Omen Transcend 14 laptop. The headphones had connected to it before with no issues an 1 hour prior but now will not work. Please help me, and thanks.

Windows for home | Windows 11 | Devices and drivers
0 comments No comments

1 answer

Sort by: Newest
  1. AI answer

    2026-11-22T22:07:32.27+00:00

    Because the Voyager 4230 will not power off, recover the headset itself first; Windows pairing and driver repairs are relevant only after its controls respond normally.

    1. Recover the headset

    1. Connect the headset to its charger and leave it connected until fully charged. A low battery can prevent Bluetooth headphones from entering pairing mode or maintaining a connection.^1^
    2. While it remains connected to power, try its power control again.
    3. If it is still frozen, open the official Voyager 4200 series troubleshooting page and use Poly Lens to check for a firmware update or recovery option.^2^
    4. Consult the model’s setup/user guide or HP/Poly support if the headset remains permanently on.^3^

    Do not apply a reset sequence intended for another Poly product. The available HP factory-reset page is not established as applicable to the Voyager 4230.

    2. Re-pair it after the headset responds

    Once the headset can power off and enter pairing mode:

    1. Open Start → Settings → Bluetooth & devices.
    2. Find the Poly/Voyager entry, select … → Remove device.
    3. Turn Windows Bluetooth off, wait 10 seconds, and turn it back on.
    4. Put the headset into pairing mode and keep it close to the laptop.
    5. Select Add device → Bluetooth, then choose the normal Poly/Voyager headset entry.

    Microsoft recommends removing and adding the device again when it remains listed but will not connect.^1^

    If the headset does not appear, go to Settings → Bluetooth & devices → Devices → Device settings and change Bluetooth devices discovery to Advanced, then search again.^4^

    3. Repair the laptop Bluetooth side only if needed

    If the headset is now responsive but still cannot connect:

    1. Run Settings → System → Troubleshoot → Other troubleshooters → Bluetooth → Run.
    2. Right-click Start → Device Manager → Bluetooth.
    3. Right-click the laptop’s Bluetooth adapter—not the headset—and select Update driver → Search automatically for drivers.
    4. If Windows finds nothing, install the Windows 11 Bluetooth/Wireless driver specifically provided for the OMEN Transcend 14 by HP, then restart. Microsoft notes that the PC manufacturer may provide the appropriate current driver.^4^

    If the Bluetooth switch is missing or grayed out, fully power-cycle the laptop:

    1. Hold Shift while selecting Start → Power → Shut down.
    2. Wait one minute.
    3. Turn the laptop on and check Bluetooth again.

    A shutdown—not Restart—completely powers off the PC’s Bluetooth hardware.^5^

    If the headset remains unable to power off even after charging and firmware/recovery checks, that points away from an ordinary Windows pairing problem; use HP’s Poly support channel for model-specific hardware service.^6^


    References

    1. [Windows 11](https://support.microsoft.com/windows/hardware/bluetooth/troubleshoot-bluetooth-not-connecting-in-windows)
    2. Voyager 4200 series - Troubleshooting | HP® Support
    3. Voyager 4200 series - Setup and User Guides | HP® Support
    4. [Windows 11](https://support.microsoft.com/windows/hardware/bluetooth/fix-bluetooth-problems-in-windows#general-bluetooth-troubleshooting-in-windows-11)
    5. [Windows 11](https://support.microsoft.com/windows/hardware/bluetooth/fix-bluetooth-disappeared-in-windows#summary)
    6. Poly Support | HP® Support
    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.