Windows 11 Home error code 0x80070035 connecting to NAS

graham shepherd 20 Reputation points
2026-11-22T02:17:42.1066667+00:00

I have a new pc with Win 11 Home installed. I have a Seagate NAS as my main back up storage device which is not accesible on my new PC, I get error code 0x80070035 when I click on the drive name in explorer. My old pc recognizes the NAS and all files are accessible!

All the network settings are correctly set, public off both check boxes for private are on and in other networks both check boxes are off.

Online video indicates the next steps require modifying the local group editor however this is not available to Home versions.

How do i fix this problem

Windows for home | Windows 11 | Devices and drivers
0 comments No comments

Answer accepted by question author
SD - IA 183.6K Reputation points Independent Advisor
2026-11-22T06:05:06.17+00:00

Hi,

The error code is network path not found. Does the drive support SMBv1 only?

Verify both on the same network.

  1. Right-click Start and select Terminal (Admin).
  2. Run the following command:
Enable-WindowsOptionalFeature -Online -FeatureName SMB1Protocol -All
Set-SmbClientConfiguration -RequireSecuritySignature $false 
Set-SmbClientConfiguration -EnableInsecureGuestLogons $true

  1. Restart Windows when prompted.

I look forward to hearing from you to get the results of the troubleshooting.

Was this answer helpful?

1 person found this answer helpful.

1 additional answer

Sort by: Oldest
  1. AI answer

    2026-11-22T02:17:58.44+00:00

    For a new Windows 11 Home PC showing 0x80070035 to a NAS that still works from an older PC, the supported checks are:

    1. Confirm basic sharing prerequisites on the Windows 11 PC.
      • Open Settings > search for manage advanced sharing settings.
      • Under Private networks, turn on Network discovery and File and printer sharing.
      • Under All networks, turn off password protected sharing.
    2. Make sure the required discovery services are running.
      • Press Windows key + R, type services.msc, and select OK.
      • For each service below, open Properties, start it if stopped, and set Startup type to Automatic:
        • Function Discovery Provider Host
        • Function Discovery Resource Publication
        • SSDP Discovery
        • UPnP Device Host
    3. Verify the PC and NAS are on the same network and that the network profile is Private.
      • Microsoft lists this as a required condition for file sharing to work reliably.
    4. Check whether this is an SMB security-default issue.
      • On newer Windows versions, common causes include:
        • guest access being blocked
        • SMB signing requirements
        • NTLM restrictions
      • On the client, run these commands in PowerShell to inspect the current SMB state:
             net use
             Get-SmbConnection
             Get-SmbClientConfiguration
        
      • Also check Event Viewer > Applications and Services Logs > Microsoft > Windows > SMBClient > Connectivity and Security.
    5. If the NAS is using guest access, fix it by using valid NAS credentials instead of guest access.
      • Microsoft’s recommended resolution is to connect with valid credentials to the server or NAS.
      • Re-enabling insecure guest logons is explicitly discouraged because it increases exposure to rogue-server and man-in-the-middle attacks.
    6. If the problem started after moving to a newer Windows build and the NAS is older, check SMB signing support on the NAS.
      • If the target does not support SMB signing, newer Windows builds can reject the connection.
      • The preferred fix is to enable SMB signing on the NAS if the device supports it.
    7. If name-based access fails, test by connecting with the server’s proper name rather than an IP-based or workgroup-only path when possible.
      • Microsoft notes NTLM-related failures are more likely when connecting by IP address or to legacy workgroup/NAS targets.
    8. If general networking on the new PC still looks wrong, use Network reset as a last step.
      • Go to Settings > Network & internet > Advanced network settings > Network reset > Reset now.
      • Risk: this removes and reinstalls network adapters and resets networking settings. VPN clients and similar software may need to be reconfigured afterward.

    The key supported fix path is:

    • verify sharing settings and services
    • inspect SMB client configuration and SMBClient events
    • use NAS credentials instead of guest access
    • update NAS SMB settings if it does not meet newer Windows security defaults

    References:

    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.