My preinstalled camera has vanished

Luke Bender 0 Reputation points
2026-11-22T00:11:19.5566667+00:00

I have a webcam installed into my laptop, it's a Victus. Suddenly it has just stopped working, no apps can detect it and its disappeared on any input selection screen. I've tried troubleshooting and gotten nothing

Windows for home | Windows 11 | Devices and drivers
0 comments No comments

2 answers

Sort by: Most helpful
  1. EmilyS726 282.2K Reputation points Independent Advisor
    2026-11-22T00:43:42.1333333+00:00

    If you open the Camera app, what does it say? Any error message? Or is it just a black screen? Any additional information would be helpful if you don't mind.

    Most camera issues can be due to a physical privacy cover covering the lens. Make sure that's not the case.

    Otherwise there is usually a physical button/key/switch you can use to turn the camera on or off. For example, most Lenovo uses F8 or Fn+F8, or a switch above the lens, HP has a camera key or a button on the side of the laptop, MSI uses F6 or Fn+F6, etc.

    If you are not sure, tell me what the camera app says/shows, and then please hold down Windows + R keys, type in msinfo32.exe and hit enter. Then share a screenshot of the System Information window. Thanks!

    Was this answer helpful?

    0 comments No comments

  2. AI answer

    2026-11-22T00:12:14.7766667+00:00

    Use the Victus camera privacy key or shutter to re-enable the webcam, because HP laptops can electronically disable the built-in camera so that it disappears from every app.^1^

    1. Re-enable the Victus camera

    1. Inspect the function-key row for a key showing a camera, crossed-out camera, or privacy shutter icon.
    2. Press that key once. If nothing changes, press Fn + that key.
    3. Check for a physical shutter beside the webcam lens and open it.
    4. Perform a full Restart—not sleep or shutdown/fast startup—then open Start → Camera.

    Windows confirms that a hardware camera button, Fn key, side switch, or lens shutter can prevent the device from being recognized.^2^

    2. Check whether Windows detects the hardware

    Right-click Start → Device Manager, then inspect:

    • Cameras
    • Imaging devices
    • Sound, video and game controllers
    • Other devices

    Select View → Show hidden devices, followed by Action → Scan for hardware changes.

    Then follow the matching result:

    Camera appears but is disabled

    Right-click it and select Enable device. Restart and test the Camera app.

    Also open Settings → Bluetooth & devices → Cameras. If the webcam appears under Disabled cameras, select it and choose Enable. A camera may be absent from this Settings page when its driver is missing, it is nonfunctional, or Device Manager disabled it.^3^

    Camera appears with a warning icon

    1. Right-click the camera → Properties and record the error shown under Device status.
    2. Select Driver → Uninstall Device.
    3. If offered, select Attempt to remove the driver for this device.
    4. In Device Manager, select Action → Scan for hardware changes.
    5. Restart the laptop.

    Then open Settings → Windows Update → Advanced options → Optional updates and install any camera, imaging, USB, or chipset driver offered. Microsoft documents uninstalling and rescanning as the recovery sequence for a detected camera driver problem.^2^

    If needed, install the camera and chipset-related drivers listed for the exact Victus product number through HP Support rather than using a driver intended for another Victus variant.^1^

    Camera is completely absent

    If scanning finds neither the camera nor an unknown/problem device:

    1. Run HP’s hardware diagnostics and select the camera/webcam component test if available.
    2. Install the exact model’s HP chipset and camera-related drivers.
    3. Restart and inspect Device Manager again.

    If HP diagnostics cannot detect the webcam and it remains entirely absent after the privacy control and driver checks, the next step is HP service. That result points to hardware-level non-detection, such as the camera module or its internal connection, rather than an application-selection issue.^4^

    3. Only if Device Manager detects it but apps do not

    Open Settings → Privacy & security → Camera and enable:

    • Camera access
    • Let apps access your camera
    • Let desktop apps access your camera

    Permissions affect application access; they do not normally restore hardware that is entirely absent from Device Manager.^2^


    References

    1. HP PCs - Troubleshoot the webcam (Windows) | HP® Support
    2. [Windows 11](https://support.microsoft.com/windows/hardware/camera/camera-doesn-t-work-in-windows#general-troubleshooting)
    3. Camera settings page
    4. Integrated Camera Not detected by Windows (not working) - Microsoft Q&A
    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.