Test the monitors one at a time on the RTX 5050 port currently driving the working main monitor, then cross-test the working monitor on the suspect port to determine whether the fault follows the GPU output or the display.
Isolate the failing component
Shut down the PC before changing DisplayPort connections, and connect every monitor directly to the graphics card rather than the motherboard.
- Connect only the main, working monitor to its current GPU port.
- Confirm the image remains normal. This establishes a known-good monitor/port combination.
- Using that same cable and GPU port, connect one of the secondary monitors by itself.
- Normal picture: that secondary monitor can display a valid signal.
- Same black/white segmented picture: test that monitor on another computer. If it fails there too, the monitor is the likely problem.
- Connect the known-good main monitor to the GPU port previously used for the secondary monitor.
- Corruption follows the GPU port: the RTX 5050 output or its port configuration is implicated.
- Main monitor remains normal: the port works, so repeat the test with each secondary monitor and cable as a complete combination.
- Repeat on every available RTX 5050 output, avoiding docks, splitters, adapters, or converters during testing. Microsoft specifically recommends trying another video-output port and testing the monitor on another system to separate monitor faults from PC/output faults.^1^
A useful test matrix is:
| Monitor | Cable | RTX port | Result |
|---|---|---|---|
| Main/working | Known-good | Original port | Baseline |
| Secondary 1 | Known-good | Original working port | Tests monitor |
| Main/working | Known-good | Suspect port | Tests GPU port |
| Secondary 2 | Known-good | Original working port | Tests second monitor |
If every monitor fails only on one RTX port
That pattern points away from Windows display arrangement and toward the physical GPU output or card. Before pursuing hardware service:
- Power off and disconnect power.
- Reseat the graphics card and its power connectors if comfortable working inside the PC.
- Inspect the affected DisplayPort for debris or damaged contacts.
- Test another output type directly, such as HDMI, if the card and monitor provide it.
If one physical output remains corrupt with multiple known-good monitors and cables, contact the graphics-card or PC manufacturer for hardware diagnostics or warranty service.
If the corruption occurs on every GPU port
Reset the active graphics stack with:
Windows logo key + Ctrl + Shift + B
The screens should briefly blank or flicker while Windows resets the graphics driver.^2^
Because the driver has already been reinstalled, do not repeat the same reinstall. If the problem began immediately after a Windows or NVIDIA driver update, use Device Manager → Display adapters → GeForce RTX 5050 → Properties → Driver → Roll Back Driver, then restart. The rollback option requires administrator rights and is unavailable when Windows has no previous driver retained.^3^
If the port tests do not identify a hardware path and rollback is unavailable or irrelevant, report the reproducible monitor/port matrix through Feedback Hub, including a photo of the corruption and the exact RTX driver version. Microsoft recommends Feedback Hub when the external-monitor troubleshooting procedure does not resolve the issue.^1^
References