Windows Miracast failing multiple times

Deepak Chowdary 0 Reputation points
2026-11-20T09:39:25.5933333+00:00

Hii,

Does anyone tried to solve this issue before with the Miracast permanently? I have Lenovo G14 Laptop and Dell Latitude 3450. I tried to connect them to the Samsung and LG TVs for Screen Casting using Miracast, they connect sometimes fine, but sometimes, gets the issue as "Unable to connect, try using your mobile phone instead".

Tried to

Both laptops are Windows Pro 11 versions

  1. Update WiFi adapters on both devices
  2. Update TVs Software
  3. Delete the connected devices from both TVs and Laptops
  4. Changed Firewall rules to allow Miracast
  5. Rolled back to previous versions of WiFi drivers to check After the changes, it worked fine for sometime but again getting the issue, and sometimes there will be screen freeze on TVs screen while Laptop screen is working perfectly fine. Does any one got a permanent fix for this issue? Apparently, both the Laptop and TV technicians gave up as they cannot figure out the root cause for this issue. If any one fixed this or tried any other alternatives, please help here.
Windows for business | Windows 365 Enterprise

2 answers

Sort by: Oldest
  1. AI answer

    2026-11-20T09:40:26.8+00:00

    Set the laptop and wireless display to the same refresh rate first, because Windows documents mismatched refresh rates as a cause of video stalling or freezing over Miracast.^1^

    Correct the freezing

    While connected to the TV:

    1. Open Settings > System > Display > Advanced display.
    2. Select the laptop display and note its refresh rate.
    3. Select the wireless TV display.
    4. Under Choose a refresh rate, select the same rate—typically 60 Hz if offered.
    5. Disconnect and reconnect with Windows key + K, then test both Duplicate and Extend modes.

    The available rates depend on what each display supports; selecting a rate marked with an asterisk can also change the resolution.^2^

    Verify both driver paths actually advertise Miracast support

    Because the Wi-Fi, TV firmware, pairing records, firewall rules, and several driver versions have already been tested, do not repeat those changes yet. Run this on each laptop in Command Prompt:

    netsh wlan show driver
    netsh wlan show wirelesscapabilities
    

    Check for:

    Wireless Display Supported: Yes
    (Graphics Driver: Yes, Wi-Fi Driver: Yes)
    

    Also check that both WDI Version (Windows) and WDI Version (IHV) are nonzero. Microsoft documents these outputs as checks for Miracast support from both the graphics and Wi-Fi drivers.^3^

    Interpret the results as follows:

    • Graphics Driver: No — investigate the GPU driver path.
    • Wi-Fi Driver: No or zero WDI versions — investigate the WLAN driver/adapter path.
    • Both Yes on both laptops — receiver interoperability or the wireless environment becomes more likely, but this still does not prove which component failed.

    Isolate the failing combination

    Test all four combinations and record whether each one connects and remains stable:

    Source Samsung TV LG TV
    Lenovo laptop Result Result
    Dell laptop Result Result

    This distinguishes the next owner:

    • One laptop fails with both TVs: focus on that laptop’s Wi-Fi/GPU path.
    • Both laptops fail with only one TV: focus on that TV’s Miracast implementation.
    • Every pairing fails in the same location but works elsewhere: investigate local wireless congestion or channel behavior.
    • All combinations fail intermittently: capture logs during the failure rather than continuing to swap drivers.

    Miracast interoperability depends on successful Wi-Fi Direct discovery, pairing, and reconnect behavior across both the source and receiver implementations.^4^

    Capture the actual connection-stage failure

    Immediately after Unable to connect:

    1. Press Windows key + R, enter eventvwr.msc, and select OK.
    2. Open Applications and Services Logs > Microsoft > Windows > WLAN-AutoConfig > Operational.
    3. Find events at the exact connection-attempt time.
    4. Save the relevant events with Save Selected Events.
    5. Compare the event IDs and messages between the Lenovo and Dell.

    Microsoft identifies WLAN-AutoConfig as the Windows event log containing Miracast connection information; its errors can show where the connection fails.^5^

    Business-managed laptop check

    If either Windows 11 Pro laptop is domain-joined or managed by organizational policy:

    1. Press Windows key + R, run rsop.msc.
    2. Review Computer Configuration > Windows Settings > Security Settings > Wireless Network (IEEE 802.11) Policies.
    3. Open the applied wireless policy and inspect Network Permissions.
    4. Have the administrator verify that creating user wireless profiles is permitted.

    This branch applies only to managed/domain-joined devices; Group Policy can otherwise block Miracast-related wireless behavior.^5^

    If matching refresh rates resolves the freeze but connection failures remain, the WLAN-AutoConfig events and four-device test matrix are the useful evidence to give Lenovo, Dell, Samsung, or LG support. If no stable TV/laptop pairing exists, HDMI is the dependable alternative; Microsoft’s standard Windows repair guidance otherwise consists mainly of capability, Wi-Fi, firmware/driver, restart, and device-removal checks, most of which have already been completed.^6^


    References

    1. Video playback settings in Windows | Microsoft Support
    2. [Windows 11](https://support.microsoft.com/windows/hardware/display-graphics/change-the-refresh-rate-on-your-monitor-in-windows#to-change-the-refresh-rate)
    3. Miscellaneous technical details and validation
    4. Validating your implementation
    5. Troubleshoot display projection to Surface Hub
    6. [Windows 11](https://support.microsoft.com/windows/hardware/display-graphics/fix-connections-to-wireless-displays-or-docks-in-windows)
    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

  2. Hoang Le Huy 2,240 Reputation points Independent Advisor
    2026-11-20T10:11:49.13+00:00

    Hello Deepak Chowdary,

    Based on what you've already tested, I don't think this is a simple driver or firewall issue anymore. The fact that the problem occurs on multiple laptops (Lenovo and Dell) and multiple TV brands (Samsung and LG), while sometimes working and sometimes failing, points more toward Miracast/Wi-Fi Direct interoperability and stability issues rather than a fault with a specific device.

    Miracast relies on a direct Wi‑Fi Direct connection between the PC and TV, independent of normal internet connectivity. Microsoft recommends verifying that both the graphics driver and Wi‑Fi driver report Miracast support. Run netsh wlan show driver and confirm that Wireless Display Supported: Yes (Graphics Driver: Yes, Wi‑Fi Driver: Yes) is reported. If either component reports "No," Miracast reliability will be affected regardless of driver updates.

    The screen freezing symptom is especially interesting. I've seen cases where Miracast connects successfully but freezes because of refresh rate negotiation issues between the GPU and the wireless display. Try checking Settings > System > Display > Advanced Display and ensure the wireless display is running at a standard refresh rate such as 60 Hz. Microsoft community guidance specifically identifies display refresh-rate mismatches as a cause of Miracast video stalling and freezing.

    Unfortunately, there is no known "permanent fix" for all Miracast environments because the technology depends on Wi‑Fi Direct, TV firmware, graphics drivers, wireless drivers, and radio-frequency conditions all working together. When the issue reproduces across different laptop and TV vendors, the root cause is often the Miracast implementation itself rather than a hardware defect.

    For business use where reliability is critical, my recommendation is to use a dedicated wireless presentation receiver such as Microsoft Wireless Display Adapter, Teams Rooms casting, or a wired HDMI/USB-C display connection. In enterprise environments, these solutions are typically far more stable than consumer TV Miracast implementations.

    If my answer is useful for you, please hit Accept the answer for me please.

    HL.

    Was this answer helpful?

    0 comments No comments

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.