Remove the TV from Windows 11’s saved wireless displays, restart both devices, and pair them again through Windows key + K.
Re-pair the TV
- On the TV, open its Screen Mirroring, Screen Share, or Miracast input.
- On the PC, open Start → Settings → Bluetooth & devices → Devices.
- Under Wireless displays & docks, find the TV and select More options (…) → Remove device.
- Turn the TV completely off, restart the PC, and then turn the TV back on.
- Press Windows key + K, select the TV, and accept any connection prompt displayed on the TV.
Microsoft recommends removing and reconnecting a wireless display when its connection is unreliable.^1^
A stable internet connection does not rule out a casting problem: Windows key + K uses Miracast, and the PC’s Wi-Fi and graphics drivers, plus the TV’s Miracast implementation, participate in that connection.
Update every component involved
If it disconnects again:
- Update Windows
- Open Settings → Windows Update → Check for updates.
- Install available updates and restart.
- Update the PC’s drivers
- Obtain the latest Wi-Fi and graphics/display drivers from the PC manufacturer.
- Do not rely only on Device Manager reporting that the existing driver is current; check the manufacturer’s support page for the exact PC model.
- Update the TV
- Open the TV’s settings and install its latest firmware.
- The menu name varies by manufacturer, commonly Support, System, or Software Update.
Microsoft specifically recommends current device drivers and current wireless-display firmware for Miracast connection problems.^1^
Check Miracast driver support
Open Command Prompt, run:
netsh wlan show drivers
Find this line:
Wireless Display Supported: Yes
(Graphics Driver: Yes, Wi-Fi Driver: Yes)
If either driver reports No, update that driver from the PC manufacturer. If it remains No, that PC/driver combination does not currently declare Miracast support.^2^
If the connection still drops
- Keep the PC reasonably close to the TV and remove nearby sources of wireless interference.
- Test casting immediately after restarting the TV. If that consistently works only temporarily, contact the TV manufacturer about its Miracast firmware.
- If reliable, uninterrupted display output is required and Miracast remains unstable after the updates and re-pairing, use an HDMI cable as the fallback.
- If the PC’s normal Wi-Fi connection also begins disconnecting—not only casting—collect the failure time and Windows event data before resetting the network stack or removing drivers, because those actions can erase useful diagnostic evidence.^3^
References
- [Windows 11](https://support.microsoft.com/windows/hardware/display-graphics/fix-connections-to-wireless-displays-or-docks-in-windows)
- Miscellaneous technical details and validation
- Advanced troubleshooting wireless network connectivity