Reset the Windows TCP/IP and DNS components from an administrator Command Prompt, because the broader Network reset has already been tried without resolving the connection.
1. Reset the network stack
- Select Start, type Command Prompt, and choose Run as administrator.
- Run these commands in order:
netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns
- Restart the laptop normally.
- Reconnect to Wi‑Fi and test a website.
These commands reset Winsock and TCP/IP, request a fresh IP address from the router, and clear the DNS cache.^1^
2. If it still says “No internet, secured”
Remove the saved connection without repeating Network reset:
- Open Settings → Network & internet → Wi‑Fi → Manage known networks.
- Select your Wi‑Fi network and choose Forget.
- Select the network again and enter its password.^1^
If your router displays separate 2.4 GHz and 5 GHz network names, also try the other band. This can identify a band-specific compatibility or signal problem.
3. Reinstall the laptop manufacturer’s Wi‑Fi driver
Do this if the commands and reconnection do not help, especially if the problem began after a Windows or driver update.
- On another connected device, visit the laptop manufacturer’s support site.
- Find the exact laptop model and download its Windows 11 Wireless/WLAN driver to a USB drive.
- On the laptop, open Device Manager → Network adapters.
- Right-click the wireless adapter—not Ethernet, Bluetooth, or a virtual adapter—and select Uninstall device.
- If offered, select Attempt to remove the driver for this device, then choose Uninstall.
- Restart Windows. It should reinstall an adapter driver automatically.
- If Wi‑Fi remains unavailable or offline, install the manufacturer’s downloaded WLAN driver.
Having the manufacturer’s driver available before uninstalling prevents being left without a usable adapter driver.^1^
4. Identify where connectivity stops
If Windows remains connected to Wi‑Fi but has no Internet access, open an administrator Command Prompt and run:
ipconfig
netsh wlan show interfaces
netsh wlan show drivers
netsh wlan show wlanreport
In ipconfig, find the Wi‑Fi adapter’s Default Gateway, then test it:
ping <DefaultGateway>
For example, use ping [IP Address] only if that is the gateway shown on your laptop.
- Gateway replies: The laptop can reach the router; the remaining issue is more likely in IP routing, DNS, proxy, VPN, firewall, or upstream Internet access.
- Gateway times out: Concentrate on the Wi‑Fi adapter, driver, signal/band, or communication between this laptop and the router.
- No Default Gateway or no normal IP address: The laptop may not be obtaining its network configuration. Windows guidance identifies DHCP and IP configuration as the next area to investigate when Wi‑Fi association succeeds but network access fails.^2^
The wlanreport command displays the location of an HTML report containing recent wireless sessions, disconnect reasons, adapter information, and related events. If support is needed, provide the failure time, adapter model, driver version/date, and the relevant disconnect reason—but remove network and device identifiers before sharing the report publicly.^2^
References