bluetooth doesnt work

Liam Klunyk 0 Reputation points
2026-11-20T07:29:55.35+00:00

When i go to turn on Bluetooth from the task bar it doesn't do anything and remains off , when i go into settings it says Bluetooth is on but when i try to add a device it closes the device search screen after 3 seconds without any devices showing up. I've tried reinstalling the Bluetooth drivers, windows and i used the Bluetooth troubleshooter as well and no luck.

Windows for home | Windows 11 | Devices and drivers
0 comments No comments

1 answer

Sort by: Oldest
  1. AI answer

    2026-11-20T07:31:13.6866667+00:00

    Perform a full shutdown to reset the Bluetooth radio, because a normal restart may leave the adapter’s failed power state unchanged.

    1. Fully power-cycle the Bluetooth hardware

    1. Disconnect unnecessary USB devices, especially any external Bluetooth adapter.
    2. Hold Shift while selecting Start → Power → Shut down.
    3. After the PC turns off, disconnect its power cable for a desktop, or unplug the laptop charger.
    4. Wait at least one minute, reconnect power, and start the PC.
    5. Open Settings → Bluetooth & devices and test Add device.

    Holding Shift while shutting down forces a complete shutdown rather than leaving hardware in a hybrid/Fast Startup state. Microsoft specifically requires Shut down, not Restart, for this Bluetooth hardware reset.^1^

    Also press Windows+A and ensure Airplane mode is off; Airplane mode can disable Bluetooth even when the Settings page appears inconsistent.^1^

    2. Install the exact manufacturer driver and firmware

    Since reinstalling Windows and the Bluetooth driver did not help, do not repeat the same generic driver installation. Determine whether the driver previously installed came from Windows Update or from the support page for the exact PC, laptop, motherboard, or USB Bluetooth adapter model.

    1. Press Windows+R, enter msinfo32, and note System Manufacturer and System Model.
    2. Go to that manufacturer’s support page.
    3. Install the Windows 11 Bluetooth driver listed for the exact model.
    4. If Bluetooth and Wi-Fi share one wireless card, also install the matching WLAN/Wi-Fi driver.
    5. Install any applicable BIOS, UEFI, chipset, or wireless firmware update for that model, following the manufacturer’s instructions.
    6. Restart and test Bluetooth.

    Windows Update may use a generic driver that does not work correctly with a particular chipset; the model-specific driver is therefore a distinct step from the reinstall already attempted.^2^

    Also check Settings → Windows Update → Advanced options → Optional updates for relevant driver or firmware packages. If none are listed, use the manufacturer’s support page for BIOS/UEFI and firmware updates.^1^

    3. Check what Windows reports for the adapter

    Open Device Manager → View → Show hidden devices, then expand Bluetooth and Other devices.

    • Adapter appears normally: Open Properties → General and note the device status. Then press Windows+R, run services.msc, and find Bluetooth Support Service. If it is stopped, start it; otherwise restart it. Set Startup type to Automatic, apply the change, and reboot.^3^
    • Yellow warning icon or error code: Record the exact code, such as Code 10 or Code 43. Install the OEM driver and firmware above rather than another generic driver.
    • Adapter is missing or repeatedly disappears: Select Action → Scan for hardware changes. If it remains absent after the full shutdown and OEM updates, this can indicate a driver, firmware, power-management, or physical adapter failure—it does not by itself prove defective hardware.
    • USB Bluetooth adapter: Test another USB port, preferably without a hub. If possible, test that adapter on another PC to distinguish an adapter failure from a Windows or motherboard problem.

    Changing device-discovery mode to Settings → Bluetooth & devices → Devices → Bluetooth devices discovery → Advanced can expose additional device types, but the pairing window closing after three seconds suggests the adapter state should be resolved first.^4^

    If the adapter remains missing, reports an error after the model-specific updates, or disappears again after each power cycle, contact the PC/motherboard or USB-adapter manufacturer. Provide the exact model, Bluetooth adapter name, Device Manager status/error code, and whether Bluetooth is built in or supplied by USB.


    References

    1. Windows 11
    2. Bluetooth not working properly on Windows 11 - Microsoft Q&A
    3. Bluetooth stopped working . have done alll the recommended methods to fix problem to no avail. help! - Microsoft Q&A
    4. Windows 11
    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.