Open the webcam’s physical privacy shutter or turn on its camera switch/key, because Windows can display “Your camera might be covered” while the camera remains detected but its image is physically blocked.^1^
1. Check the physical camera controls
Look closely around the webcam at the top of the screen and check:
- A small sliding shutter beside the lens—move it until the lens is fully visible.
- A camera on/off switch on either side of the laptop.
- A top-row keyboard key showing a camera or crossed-out camera. Press it once; on some laptops, use Fn + that key.
- If the laptop is docked with its lid closed, open the lid and test again.
A closed shutter or active kill switch can leave the camera available to Windows while producing a black image or replacement warning image.^2^
Open Start > Camera after changing the control. If the preview appears, the problem is resolved.
2. If the Camera app still shows no picture
Check Windows camera permissions:
- Open Start > Settings > Privacy & security > Camera.
- Turn on Camera access.
- Turn on Let apps access your camera.
- Enable the specific Microsoft Store app you want to use.
- For Teams, Zoom, browsers, and other traditional desktop programs, turn on Let desktop apps access your camera.^3^
If Camera access is greyed out, an administrator must change it.
Test Start > Camera again. If it works there but not in another application, the camera hardware and Windows driver are working; check that application’s camera selection and permissions.
3. Repair camera detection or its driver
If the Windows Camera app also fails:
- Right-click Start and select Device Manager.
- Look under Cameras, Imaging devices, or Sound, video and game controllers.
- If the camera is missing, select Action > Scan for hardware changes.
- If it appears, right-click it and select Update driver > Search automatically for drivers.
- Restart the computer and retest Start > Camera.^1^
If the issue began immediately after a Windows or driver update:
- In Device Manager, right-click the camera and select Properties.
- Open Driver > Roll Back Driver.
- Restart and test again.
If rollback is unavailable or does not work, use Properties > Driver > Uninstall Device, then select Action > Scan for hardware changes and restart. Removing a driver can temporarily disable the camera until Windows reinstalls it.
4. Run the Windows troubleshooter
Go to:
Start > Settings > System > Troubleshoot > Other troubleshooters > Camera > Run
If none of these steps works, obtain the PC manufacturer and model by pressing Windows + R, entering msinfo32, and checking System Manufacturer and System Model. Then use the manufacturer’s support guidance to identify the exact shutter key, firmware setting, or camera driver for that model.
References
- [Windows 11](https://support.microsoft.com/windows/hardware/camera/camera-doesn-t-work-in-windows#most-common-camera-problems)
- Privacy shutter/switch notification
- [Windows 11](https://support.microsoft.com/windows/privacy/manage-app-permissions-for-a-camera-in-windows#summary)