I just got my new keyboard and mouse. I've followed the instructions on the box but the keyboard doesn't work but the mouse does work. Please help. I'm now using my old keyblard and mouse and they work fine and they are Logitech as well.

Preston Tucker 0 Reputation points
2026-11-20T01:31:51.9066667+00:00

I just got my new keyboard and mouse. I've followed the instructions on the box but the keyboard doesn't work but the mouse does work. Please help. I'm now using my old keyblard and mouse and they work fine and they are Logitech as well.

Windows for home | Windows 11 | Devices and drivers
0 comments No comments

2 answers

Sort by: Most helpful
  1. Estrella721 48,520 Reputation points Independent Advisor
    2026-11-20T02:08:09.7033333+00:00

    Have you inserted the batteries into your Keyboard and made sure it is turned on? Does the keyboard light up?

    If the batteries are installed and the devices are turned on but they still don't work, unplug the USB receiver and plug it into a different USB port, then try again.

    If the problem persists, let's isolate the issue by connecting the wireless mouse and keyboard to another device or computer. Do they work there?

    Was this answer helpful?

    0 comments No comments

  2. AI answer

    2026-11-20T01:33:52.6166667+00:00

    Because the MK345 mouse works through the shared USB receiver but the keyboard shows no lights or response, check the keyboard’s separate power supply first, then test the receiver and keyboard on another PC.

    1. Check the MK345 keyboard’s power

    The keyboard and mouse use separate batteries even though they share one receiver.

    1. Move the keyboard’s ON/OFF switch to OFF.
    2. Open its battery compartment.
    3. Remove any battery-isolation tab or packaging that may remain.
    4. Reinstall the batteries, matching the + and – markings.
    5. Preferably install fresh batteries, even if the supplied ones are new.
    6. Move the switch to ON, wait 10 seconds, and press Caps Lock to check for an indicator light.

    The MK345 guide identifies the keyboard’s own power switch, battery compartment, and Caps Lock indicator.^1^

    2. Re-establish the receiver connection

    If the keyboard now shows signs of power but still does not type:

    1. Unplug the shared Logitech receiver.
    2. Wait about 10 seconds.
    3. Plug it directly into a different USB port on the computer—not through a hub.
    4. Turn the keyboard off and back on.
    5. Confirm that this is the receiver supplied with this MK345 set, rather than the receiver from the old Logitech set.

    Microsoft recommends unplugging a wireless USB receiver for about 10 seconds, reconnecting it, trying another USB port, and bypassing USB hubs.^2^ Logitech’s receiver setup also requires the receiver to be connected and the keyboard powered on.^3^

    3. Decide whether the new keyboard is faulty

    If there is still no light or response with fresh batteries:

    1. Connect the MK345 receiver to another Windows PC.
    2. Turn on the MK345 keyboard and test Caps Lock and typing.
    3. If the mouse works there but the keyboard remains completely unresponsive, return or exchange the MK345 set as defective.

    Microsoft’s hardware guidance says that a device showing no lights should be tested on another PC; if it also fails there, it may need replacement.^2^

    Driver repair or changing Windows Fast Startup is not the first step here: the old keyboard works, the new mouse works through the receiver, and the new keyboard has no sign of power.


    References

    1. https://www.logitech.com/assets/52463/3/logitech-wireless-combo-mk345.pdf
    2. Mouse and keyboard problems in Windows | Microsoft Support
    3. Wireless Receiver Setup for Keyboard | Logitech Support
    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.