The SIM slot works only if your exact ProBook 450 G10 configuration also contains an internal WWAN/mobile-broadband modem; the slot alone does not provide cellular capability.^1^
1. Check whether the WWAN modem is installed
- Right-click Start and select Device Manager.
- Expand:
- Network adapters
- Modems, if present
- Other devices
- Look for a cellular device identified as WWAN, Mobile Broadband, LTE, 5G, Fibocom, or another modem manufacturer.
Then follow the matching result:
- A cellular modem is listed: Right-click it → Properties. If it has a yellow warning symbol, note the error under Device status, then install the HP driver as described below.
- An Unknown device is listed: Open Properties → Details, select Hardware Ids, and save the first value. This identifies the precise device and prevents installing an incompatible driver.
- No cellular modem or unknown device appears: Your configuration may not contain the optional WWAN module. HP lists the nano-SIM slot but treats WWAN modules and antennas as configuration-dependent options.^2^
2. Install the driver for the exact HP product number
Find the laptop’s product number/SKU on the bottom label or in HP System Information. Do not select a driver using only “ProBook 450 G10,” because different configurations can contain different hardware.
- Open HP’s driver page for the exact SKU. For example, HP provides this page for SKU
816H5EA; use it only if that is your product number.^3^ - Select Windows 11 64-bit.
- Look under categories such as Driver – Network for a WWAN/mobile-broadband driver matching the modem shown in Device Manager.
- Install it and restart the laptop.
- Open Settings → Network & internet. If the modem is operational, Cellular should appear.
If HP does not offer a WWAN driver for your exact SKU and Device Manager does not detect a modem, installing a generic cellular driver will not add the missing hardware.
3. Check Windows optional driver updates
When the modem is present but its HP driver is not already installed:
- Connect through Wi-Fi or Ethernet.
- Open Settings → Windows Update → Advanced options → Optional updates.
- Expand Driver updates.
- Install any mobile-broadband, modem, or WWAN update.
- Restart Windows.
Optional drivers are not installed automatically, so they must be selected manually when offered.^4^
If the laptop has no WWAN module
Contact HP or an HP-authorized service provider with the exact product number and ask whether that configuration:
- supports an internal WWAN upgrade,
- already contains WWAN antennas,
- requires a specific HP-approved modem and SIM tray assembly.
A USB cellular modem or phone hotspot is the safer alternative if the laptop was not factory-equipped for WWAN. Do not purchase an internal modem until HP confirms compatibility, because the SIM slot does not establish that the necessary modem and antennas are installed.
References