Connect the HP printer by USB or place it on the same Wi‑Fi network as the PC, add it under Settings > Bluetooth & devices > Printers & scanners, and then scan with the Windows Scan app.^1^
1. Connect and add the scanner
For a USB connection
- Turn on the HP printer.
- Connect its USB cable directly to the computer.
- Open Start > Settings > Bluetooth & devices > Printers & scanners.
- Select Add device beside Add a printer or scanner.
- When the HP device appears, select Add device.
For a wireless connection
- Connect the HP printer to Wi‑Fi using its control panel or HP setup instructions.
- Ensure the printer and PC use the same Wi‑Fi network/SSID.
- Open Start > Settings > Bluetooth & devices > Printers & scanners.
- Select Add device, wait for the search to finish, and add the HP printer.
An all-in-one device might be displayed only as a printer. Select it in Printers & scanners; if Windows recognizes its scanning function, the device page will include Scanner settings.^1^
2. Scan the document
- Place the document:
- Flatbed: face down on the glass, then close the lid.
- Document feeder: insert it in the direction shown on the printer.
- Search Windows for Windows Scan and open Scan.
- If it is not installed, install Windows Scan from Microsoft Store.
- In the app:
- Select the HP device under Scanner.
- Choose Flatbed, Feeder, or Auto-configured under Source.
- Select a file type such as JPEG, PNG, TIFF, or Bitmap.
- Use Show more > Save file to to choose a destination.
- Select Scan.
If no destination is selected, Windows Scan normally saves the result in the Pictures\Scans folder.^1^
If Windows sees the printer but not its scanner
If selecting the HP device does not show Scanner settings:
- Return to Settings > Bluetooth & devices > Printers & scanners and select Add device again.
- If it remains absent, install the scanning software or full driver package for the exact HP model and Windows version from HP’s support site. Manufacturer software can provide scanner detection and controls unavailable through the basic printer setup.^2^
- Restart the printer and PC, then check Windows Scan again.
The precise HP model number—usually printed on the front or on a rear label—and the Windows version are needed to identify the correct HP package if these steps do not detect it.
References