power cycle did the trick
Randomly disconnected second monitor display and wont detect
i have a dual hdmi display port adapter, the other monitor will still connect and work if i unplug the other, i tried ctrl+win+shift+B which didnt work, BOTH monitors display but one is mirrored
Windows for home | Windows 11 | Display and graphics
2 answers
Sort by: Most helpful
-
AI answer
2026-11-19T22:54:55.6866667+00:00 Because each monitor works by itself, first determine whether Windows can detect both displays simultaneously; if it cannot, isolate the dual-HDMI adapter and confirm that it supports two independent extended displays rather than signal splitting.
1. Check whether Windows detects both displays
- Connect both monitors to the adapter and turn both on.
- Press Windows key + P, then select Extend.
- Open Settings → System → Display → Multiple displays → Detect.
- Select Identify if two displays appear. Confirm that each display is configured to extend the desktop. ^1^
Interpret the result:
- Both displays appear, but one remains blank: select the blank display in Settings and test a lower resolution or refresh rate. Also use the monitor’s physical controls to verify that its selected input matches the connected HDMI port.
- Only one display appears: continue with the adapter-path test below.
2. Isolate the adapter path
Since either monitor works when connected alone, test the dual-output path:
- Leave both monitors connected and swap the two HDMI plugs between the adapter’s output ports.
- Observe what follows the swap:
- The failure stays on the same adapter port: that output or the adapter is likely the failing path.
- The failure follows one HDMI cable: replace that cable.
- The failure follows one monitor only when both are connected: test both at a lower resolution and refresh rate.
- If possible, test another dual-display adapter or dock.
Also verify the adapter’s specification explicitly says it supports two independent extended displays on Windows. A basic display splitter only duplicates one video signal and cannot create two independent extended displays. Microsoft also notes that the PC’s graphics adapter must support the requested number of monitors; a device with only one video output normally needs a compatible docking station or USB adapter for another independent output. ^2^
3. If this began after an update
Roll back the display driver only if the disconnection began immediately after a Windows or graphics-driver update:
- Search for and open Device Manager.
- Expand Display adapters.
- Right-click the graphics adapter → Properties → Driver.
- Select Roll Back Driver, then restart.
If Roll Back Driver is unavailable, reinstall it:
- In Device Manager → Display adapters, right-click the graphics adapter.
- Select Uninstall device.
- Select Attempt to remove the driver for this device, if shown, and choose Uninstall.
- Restart the computer.
- Return to Device Manager, right-click the display adapter, and select Update driver → Search automatically for drivers. ^2^
If another known-compatible dual-display adapter also fails, check the PC manufacturer’s specifications for the maximum supported external displays and obtain its current graphics, chipset, and dock/USB adapter drivers. If only the original adapter fails, replace that adapter rather than continuing Windows repairs.
References
AI-generated content may be incorrect. Read our transparency notes for more information.