Remove the existing JBL entry, disconnect the headphones from any other phone or computer, put them into pairing mode, and add them again instead of trying more PIN combinations.
Re-pair the headphones
- Disconnect them from other devices
- Turn off Bluetooth temporarily on any phone, tablet, TV, or computer previously paired with the headphones.
- Some JBL devices can be connected to only one device at a time; removing the JBL device from the other device’s Bluetooth settings can resolve pairing failures.^1^
- Remove the saved JBL pairing from Windows 10
- Open Start → Settings → Devices → Bluetooth & other devices.
- Select every entry for the JBL headphones, then select Remove device.
- Remove any hidden JBL entry
- Open Start, type Device Manager, and open it.
- Select View → Show hidden devices.
- Expand Bluetooth.
- If a JBL entry appears, right-click it and select Uninstall device.^1^
- Put the headphones into pairing mode
- Charge them first, then turn them off and back on.
- Use the pairing procedure for the exact JBL model—typically this means holding its Bluetooth or power button until the indicator flashes or a pairing announcement plays.
- Keep the headphones close to the computer. Windows requires the device to be in pairing mode and within range.^2^
- Add them as an audio device
- Go to Start → Settings → Devices → Bluetooth & other devices.
- Select Add Bluetooth or other device → Bluetooth.
- Select the JBL headphones when their model name appears.^2^
If Windows still requests a PIN, do not continue guessing codes. Check the manual for the exact JBL model for any model-specific pairing code. Also verify that the selected item is the headphones themselves rather than another nearby device with a similar name.
If the PIN prompt continues
Repair the computer’s Bluetooth driver:
- Open Device Manager.
- Expand Bluetooth.
- Right-click the computer’s Bluetooth adapter—not the JBL entry.
- Select Update driver → Search automatically for drivers.
- Restart the computer and repeat the pairing sequence.^3^
If updating does not help:
- In Device Manager → Bluetooth, right-click the Bluetooth adapter.
- Select Uninstall device.
- Restart the computer; Windows should reinstall the adapter automatically.^3^
- Put the JBL headphones back into pairing mode and add them again.
Windows 10 support ended on October 14, 2025, so if the PC supports Windows 11, upgrading is recommended for continued security fixes and technical support.^3^
References
- Cannot add bluetooth device - Microsoft Q&A
- [Windows 10](https://support.microsoft.com/windows/hardware/bluetooth/troubleshoot-bluetooth-not-connecting-in-windows#solution-4-check-the-device%E2%80%99s-battery-level)
- [Windows 10](https://support.microsoft.com/windows/hardware/bluetooth/update-bluetooth-drivers-in-windows)