An upgrade from Windows 11 24H2 or 25H2 through Windows Update should use the small 26H2 enablement package and require one restart; an all-afternoon installation is more consistent with a full in-place upgrade or an installation problem, not the intended enablement-package experience.^1^
Why it can take so long
- Starting from 24H2 or 25H2 through Windows Update: These releases share the same core system files. Provided the September 22, 2026 update KB5124010 or a later cumulative update is installed, 26H2 is activated by an enablement package rather than a complete OS replacement.^1^
- Using an ISO or installation media while keeping files and applications: This is a full in-place upgrade. Setup must migrate applications, drivers, settings, and user data, so it can take several hours. A reported manual 26H2 upgrade took over 90 minutes, while the accepted Q&A response notes that this installation method can take considerably longer.^2^
- A percentage stops changing with little or no CPU/disk activity: That is more likely a stalled installation than merely a slow one. One accepted answer treats seven hours at 46% with no activity as stuck.^3^
Microsoft does not currently document a universal 26H2 defect that makes every installation slow. The 26H2 release-health page lists current safeguard holds and confirmed issues, and it should be checked before forcing an upgrade.^4^
Practical next steps
- If Windows still works, check the installed version.
Press Windows key + R, enterwinver, and select OK.- If it reports 24H2 or 25H2, install all available cumulative updates first, then use Settings > Windows Update. When Windows 11, version 26H2 is available appears, select Download & install. This is the supported enablement-package path.^1^
- If it reports an older release, or Setup was started from an ISO, expect a full upgrade rather than the quick enablement process.
- If Windows Update is stalled or repeatedly fails, run its supported troubleshooter.
Open Start > Settings > System > Troubleshoot > Other troubleshooters, find Windows Update, and select Run. Then restart and check Windows Update again.^5^ - Check the actual failure code instead of relying on “undoing changes.”
Open Settings > Windows Update > Update history, locate the failed update, and note its error code. That generic rollback message does not identify the cause by itself.^6^ - Before another attempt:
- Keep at least 20 GB free for a 64-bit upgrade.
- Disconnect nonessential USB storage, printers, docks, and similar peripherals.
- Install available Windows and hardware-driver updates.^6^
- Only if an error identifies incompatible software:
For0xC1900208–0x4000C, open Control Panel > Programs > Programs and Features, select the incompatible application, and choose Uninstall, then retry.^6^ If third-party antivirus appears to be interfering, uninstall it temporarily from the same location. Confirm Microsoft Defender becomes active, avoid untrusted downloads while protection is reduced, and reinstall or re-enable the antivirus immediately after troubleshooting.^6^
The precise reason for this particular installation cannot be established without the starting Windows version, installation method, stalled stage, or error code. Those details are diagnostic data—not an excuse for an all-afternoon upgrade—but they determine whether the problem is an unexpectedly invoked full upgrade, a driver/application block, or a known update failure.
References
- KB5121794: Feature update to Windows 11, version 26H2 by using an enablement package | Microsoft Support
- Microsoft Surface Pro 11 - Upgrade to Windows 11 26H2 - Microsoft Q&A
- updating to win11, stuck at ‘getting updates' - Microsoft Q&A
- Windows 11, version 26H2 known issues and notifications | Microsoft Learn
- [Windows 11](https://support.microsoft.com/windows/deployment/updates-lifecycle/troubleshoot-problems-updating-windows#repair-hard-drive-errors)
- [Windows 11](https://support.microsoft.com/windows/deployment/install-upgrade/get-help-with-windows-upgrade-and-installation-errors)