Put the keyboard into pairing mode, turn on Bluetooth in Windows, and select the keyboard from the Add a device list.
Connect the keyboard
- Power the keyboard
- Install or charge its batteries.
- Turn it on.
- Press and hold its Bluetooth/Pair button until an indicator light flashes. The exact button varies by manufacturer; on the Microsoft Bluetooth Keyboard, hold the button on the bottom for about five seconds.^1^
- Pair it in Windows 11
- Open Start → Settings → Bluetooth & devices.
- Switch Bluetooth to On.
- Select Add device → Bluetooth.
- Select the keyboard when its name appears.
- Follow any displayed instructions, then select Done.^2^
- Pair it in Windows 10
- Open Start → Settings → Devices → Bluetooth & other devices.
- Switch Bluetooth to On.
- Select Add Bluetooth or other device → Bluetooth.
- Select the keyboard and complete any displayed instructions.^2^
Windows normally installs the required keyboard support automatically. After pairing, the keyboard should reconnect whenever it is turned on and within range.
If the keyboard does not appear
- Keep it close to the computer and ensure its pairing light is flashing.
- If it was previously paired with another computer or tablet, disconnect it there and restart pairing mode.
- If Windows has no Bluetooth switch, the computer might not contain Bluetooth hardware. A USB Bluetooth adapter can add Bluetooth support.^2^
- If Bluetooth should be built in but is missing, run Settings → System → Troubleshoot → Other troubleshooters → Bluetooth. If that does not restore it, obtain the recommended Bluetooth driver from the computer manufacturer’s support page.^3^
If the keyboard came with a small USB receiver and is not actually a Bluetooth model, plug that receiver into the computer instead and turn on the keyboard.
References