USB2 suspend path (U3 entry) disables USB2 hardware LPM (L1) first or not

Cheng, Jiarui 20 Reputation points
2026-11-17T13:54:35.1966667+00:00

Does MSFT Driver will disable USB2 HWLPM firstly before U3 entry?

If not, how dose MSFT Driver handle the U3 entry during USB2 HWLPM?

Windows for home | Other | Devices and drivers
0 comments No comments

1 answer

Sort by: Most helpful
  1. Hendrix-V 21,065 Reputation points Microsoft External Staff Moderator
    2026-11-18T01:21:42.35+00:00

    Hi Cheng, Jiarui,

    L1 hardware LPM and USB suspend are separate power-management mechanisms, so you should not assume that the Microsoft USB driver always disables L1 first before entering suspend.

    For the exact sequence on your hardware, the most reliable approach is to capture the transition using a USB protocol analyzer or ETW/WPR USB trace and check whether an L1 exit occurs before suspend.

    The precise internal sequencing of the Windows USB driver is an implementation-level detail, so a trace is preferable when validating driver, firmware, or controller behavior.

    I hope this gives you a useful direction for verifying the behavior on your platform.

    Was this answer helpful?


Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.