KB5132061 boot failure (0xc0000001) fixed by disabling SVM in BIOS: AMD, 25H2
System: Windows 11 25H2, AMD processor, AS ROCK B55M, NVIDIA GTX 1070.
After the November update, the PC failed to boot with 0xc0000001. Safe Mode worked, but networking didn’t: the network adapter showed Code 37 and the Ethernet port disappeared. “Uninstall latest quality update” failed, System Restore failed, and Reset this PC failed.
Things I found:
- DISM showed Windows stuck at build 26200.9168, with the November servicing stack (9971) installed. So the November update looks like it failed partway.
- DISM /RestoreHealth and SFC found no corruption.
- The boot log (ntbtlog.txt) ended with afd.sys NOT_LOADED, after many repeated bindflt.sys NOT_LOADED lines.
-
DISM /Remove-Packagefor the RollupFix package failed with 0x800f0905, from both the recovery environment and a newer USB boot. - winsock/IP reset, chkdsk, and bcdboot didn’t help.
What fixed it: in the BIOS, I disabled SVM Mode (AMD virtualization) and at the same time enabled Secure Boot, which had been off. Windows booted normally right away. I changed both settings together, but SVM matches other reports of disabling virtualization (VT-x on Intel), and the bindflt.sys entries point that way too. I’ve paused updates until Microsoft releases a fix.
Hope this helps someone avoid a reinstall.