I cannot access network

Jamee Gomes 0 Reputation points
2026-11-15T05:30:46.9366667+00:00

I cannot access network , it shows the network but when I click on it ishows "windows cannot access \Tally- Dhaka-RJ", how to solve this problem

Windows for business | Windows Client for IT Pros | Networking | Network connectivity and file sharing
0 comments No comments

2 answers

Sort by: Most helpful
  1. Daphne Huynh (WICLOUD CORPORATION) 2,620 Reputation points Microsoft External Staff Moderator
    2026-11-16T03:49:40.4566667+00:00

    Welcome to Microsoft Q&A!

    Thank you for taking the time to provide the detailed information.

    Based on your descriptions, if you can see Tally-Dhaka-RJ but receive “Windows cannot access \Tally-Dhaka-RJ”, this generally means that Windows can discover the computer on the network, but the SMB connection required to access its shared resources is not completing successfully.

    One possible cause is that the file-sharing configuration or permissions on Tally-Dhaka-RJ do not allow your account to access the shared resource.

    Being able to see a computer under Network does not by itself confirm that its shared folders are accessible. The shared folder must also be correctly configured, and the account connecting to it must have the appropriate permissions.

    On Tally-Dhaka-RJ, you can verify the following:

    1. Open Settings and search for Manage advanced sharing settings.
    2. Under Private networks, make sure Network discovery and File and printer sharing are turned on.
    3. Confirm that both computers are connected to the same network and that the network profile is set to Private.
    4. Check the folder you are trying to access and confirm that your user account has the required Sharing and Security permissions.

    If Windows prompts for credentials, use a valid account and password for Tally-Dhaka-RJ. I would not recommend enabling insecure guest access simply to work around the problem, because current Windows versions restrict unauthenticated guest SMB access for security reasons.

    After checking the settings above, press Windows + R on the client computer, enter the below:

    \\Tally-Dhaka-RJ
    

    If the shared folders now open, the issue was most likely related to the sharing configuration or permissions.

    If you still receive the same error after completing these checks, the issue may require deeper investigation of the SMB connection, authentication, Windows event logs, or network traffic.

    I understand that you may be looking for a definitive fix, and I am sorry that I cannot reliably take the troubleshooting further through the Q&A forum alone. Microsoft Q&A is a public community support forum, so I can provide troubleshooting based on the information available and Microsoft’s published documentation, but I do not have access to your computers, network configuration, SMB logs, or diagnostic traces.

    At that point, rather than asking you to make further configuration changes without enough diagnostic information, I recommend contacting Microsoft Support or your organization's network administrator for deeper investigation.

    References: File sharing over a network in Windows | Microsoft Support

    Access Denied when you access Server Message Block (SMB) file share - Windows Client | Microsoft Learn

    Can't access shared folders from File Explorer - Windows Client | Microsoft Learn

    Guidance for troubleshooting SMB - Windows Server | Microsoft Learn

    If you find it useful, please click Accept Answer.

    Thank you for choosing Microsoft Q&A.

    Was this answer helpful?

    0 comments No comments

  2. AI answer

    2026-11-15T05:31:34.5066667+00:00

    Configure file sharing on the computer named Tally-Dhaka-RJ, then connect using its exact UNC name and valid Windows credentials.

    1. Configure the target computer

    On Tally-Dhaka-RJ:

    1. Confirm it is turned on and connected to the same local network as your computer.
    2. Open Settings → Network & internet → Properties for the active connection.
    3. Set Network profile type to Private.
    4. In Settings, search for Manage advanced sharing settings.
    5. Under Private networks, turn on:
      • Network discovery
      • File and printer sharing
    6. Keep password-protected sharing enabled for a business network, and use an account that exists on the target computer. Microsoft’s simpler LAN procedure also permits turning it off, but that provides less protection.^1^

    Share the required folder:

    1. Right-click the folder → Show more options → Give access to → Specific people.
    2. Select the user who needs access and assign the required permission.
    3. If this is centrally managed, verify that both the folder’s Sharing permissions and Security (NTFS) permissions allow that user.^2^

    2. Connect using the exact path

    In File Explorer’s address bar, enter:

    \\Tally-Dhaka-RJ
    

    Use two leading backslashes, no space after the hyphen, and the target computer’s exact name. If necessary, include the shared-folder name:

    \\Tally-Dhaka-RJ\ShareName
    

    When prompted, enter an account from the target PC, commonly in this format:

    Tally-Dhaka-RJ\username
    

    3. If the computer appears but still cannot be opened

    On Tally-Dhaka-RJ:

    1. Press Windows+R, enter services.msc, and select OK.
    2. For each service below, set Startup type to Automatic and select Start if stopped:
      • Function Discovery Provider Host
      • Function Discovery Resource Publication
      • SSDP Discovery
      • UPnP Device Host

    These are the sharing services listed in Microsoft’s Windows LAN troubleshooting procedure.^1^

    Also open Windows Security → Firewall & network protection → Allow an app through firewall and allow File and Printer Sharing on Private networks; use Domain instead if this is a domain-managed network.^3^

    4. Identify a newer SMB security failure

    If this started after upgrading to Windows 11 24H2, or the target is a NAS/third-party file server, open PowerShell and collect:

    net use
    Get-SmbConnection
    Get-SmbClientConfiguration
    

    Then inspect Event Viewer → Applications and Services Logs → Microsoft → Windows → SMBClient, particularly Connectivity and Security.^2^

    Apply only the branch matching the recorded message:

    • Unauthenticated guest access/Event 31017: connect with valid server credentials; do not enable insecure guest access.
    • SMB signing required: enable SMB signing on the target server or NAS. Do not weaken the Windows client unless the security impact has been assessed.
    • Access denied for only certain users: correct both Share and NTFS permissions.
    • Network path not found: verify the exact computer/share name and whether the target is online.

    References

    1. [Windows 10](https://support.microsoft.com/windows/experience/connectivity-networking/file-sharing-over-a-network-in-windows)
    2. Access Denied when you access an SMB file share in Windows
    3. i can see other computers on my network but cant access then ? Network error - Microsoft Q&A
    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.