Windows 11 fails to boot normally after KB5132061 — Safe Mode works, DISM rollback fails (0x800f082f)

Tascha B 5 Reputation points
2026-11-14T14:21:16.49+00:00

My Windows 11 computer has been unable to boot normally since November 13, 2026, following Windows servicing activity involving KB5132061 on November 12.

Normal startup repeatedly restarts and eventually enters Windows Recovery with the message that the device couldn't be repaired. However, Windows boots successfully into Safe Mode, and I can access my desktop and files.

Relevant findings

Windows Event Viewer (Setup log) shows:

November 12, 9:09:35 AM: Servicing initiated changes for KB5132061, moving from Staged toward Installed. Client: UpdateAgentLCU.

November 12, 9:11:12 AM: Windows reported that a reboot was necessary before the package could reach the Installed state.

November 13: Normal Windows startup began failing.

I have attempted the following:

Startup Repair — unsuccessful.

Uninstall latest quality update through Windows Recovery — unsuccessful.

System Restore to November 6 — completed successfully, but did not resolve the issue.

Clean boot with all non-Microsoft services and startup applications disabled — normal startup still fails.

CHKDSK — no disk errors or bad sectors.

Offline SFC — completed with no integrity violations.

DISM /RevertPendingActions — fails with error 0x800f082f.

Boot configuration checked using BCDEdit — Windows partition and boot loader entries appear correct.

KB5132061 does not appear in my installed updates list. I have also found a pending.xml file dated November 12, but have not manually modified or deleted it.

What I'm looking for

I have found other reports of boot failures following KB5132061, including one with the same DISM error.

Has anyone identified a reliable method to repair this installation or safely reverse the pending update without reinstalling Windows?

I need to preserve my existing applications, settings, and files. An in-place repair upgrade has been suggested, but Windows Setup generally cannot perform that operation from Safe Mode, and normal startup is unavailable.

I'm particularly interested in whether the CBS servicing logs can identify the failed operation and whether the update can be safely rolled back using its full package identity.

Any guidance from Microsoft engineers or others experiencing this issue would be appreciated. I chatted with online help yesterday with zero resolution, asked for a call back from tier 2 today which has not happened. I hve the CBS DSIM and SrtTrail ready I just can't attache because of size. Additional Troubleshooting Update – November 14, 2026

Since speaking with the Microsoft support supervisor, I have continued troubleshooting the Windows 11 startup failure.

1. Examined Windows boot logs

  • Located and reviewed ntbtlog.txt from November 13.

Identified two recorded boot sessions, including one at approximately 12:56 PM.

Reviewed loaded and unloaded drivers. The log contained repeated BOOTLOG_NOT_LOADED entries for bindflt.sys and afd.sys, but neither has been confirmed as the cause.

The boot log did not reveal a definitive driver failure.

2. Tested motherboard BIOS stability

Successfully entered the MSI motherboard BIOS.

Left the computer running in BIOS for more than five minutes without any shutdowns, restarts, or instability.

CPU temperature remained approximately 38–41°C.

This suggests the system can remain stable outside Windows, although it does not completely rule out hardware problems.

3. Verified BIOS and boot configuration

Motherboard: MSI Z390-A PRO (MS-7B98).

BIOS version: E7B98IMS.110, dated August 22, 2018.

Boot mode: LEGACY+UEFI.

UEFI Hard Disk Drive BBS Priorities correctly lists Windows Boot Manager as Boot Option #1.

No obvious boot-order configuration issue was identified.

No BIOS settings were modified.

4. Observed a possible Windows blue-screen error

During a subsequent startup attempt, I observed a blue screen flash immediately after the MSI splash screen and before reaching the Windows login screen.

The screen disappeared too quickly to read the error or stop code.

This may indicate that Windows is automatically restarting after a system failure, although the error has not yet been confirmed.

5. Continued investigating Windows licensing information

Checked the BIOS for Windows product key or activation information, but none was displayed.

Planning to verify the embedded product key, Windows edition, and activation status through Safe Mode before considering any reinstall.

Current status

The computer remains capable of entering Safe Mode, but normal Windows startup continues to fail. The system appears stable in BIOS, and the Windows Boot Manager entry is correctly configured.

The next diagnostic step is to disable automatic restart after a system failure to capture any blue-screen stop code.

My priority remains repairing the existing Windows installation without losing installed applications, configurations, or personal files. I would appreciate further technical assistance identifying the startup failure before proceeding with any reinstall that would remove installed programs.

Windows for home | Windows 11 | Performance and system failures

Answer recommended by moderator
Tascha B 5 Reputation points
2026-11-18T00:39:23.1433333+00:00

Reinstalling was the recourse that worked, unfortunately.

Was this answer helpful?


6 additional answers

Sort by: Oldest
  1. Nils Hide 0 Reputation points
    2026-11-20T19:55:41.3066667+00:00

    never mind, you reinstalled ;-)

    Was this answer helpful?

    0 comments No comments

  2. Carsten H 0 Reputation points
    2026-11-20T20:14:07.9533333+00:00

    The REAL Fix that helps -> Disable Virtualisation Support in the Bios of your Mainboard. I Disabled Intel Virtualisation and Intel VT-D in My Bios and Windows is booting up fine again ! No need to reinstall !

    Was this answer helpful?

    1 person found this answer helpful.
    0 comments No comments

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.