HLK Flush Test fails after submission despite matching filter (errata) being present

Hi

When I submit the HLK test log on the portal, the result shows failed (detailed log below). The failure is caused by the Flush Test item. However, this test item has a clear filter number (108947) assigned. May I ask why the submission still fails even though a filter number exists for this test? Thank you.

Thank you for your submission. After reviewing the package, we identified the following issue(s) that prevent approval at this time: 

1 failed test(s) are not fully covered. The following failures still require partner action: 

 *  Flush Test

 *  No applicable waiver fully covers this failed test. Thank you for your submission. After reviewing the package, we identified the following issue(s) that prevent approval at this time: 

1 failed test(s) are not fully covered. The following failures still require partner action: 

 *  Flush Test

 *  No applicable waiver fully covers this failed test. 

~~~

![User's image](/api/attachments/db487345-005d-419d-9ddf-78ddf817a85b?platform=QnA)

Thanks,

Ethan