Windows 10 Feature Update 20H2 consistently fails with 0x80242016 error

Anonymous
2020-12-17T20:42:31+00:00

Feature Update to Windows 10, version 20H2 has failed to installed 43 times.   The message in the "View Update History" indicates "Last failed install attempted on MM/DD/YYY - 0x80242016".

I've tried numerous posted articles to correct the 0x80242016 error to no avail.    Will I've tried various suggestions to delete the the update and download it, windows update trouble shooter, or stopping/starting various services before attempting to reinstall the update.  I have not be able to use the DISM command, with the local source files because I cannot locate the Windows source files on my PC.  Open to ideas and suggestions.

  • What risk to my machine would there be to perform a Windows 10 Update In Place from 1909 to 20H2 (assuming I can download an install the most current version/build)?
  • Would the update in place reuse my current license/activation.
  • Windows10 Update in place KB Article

Windows Specification:

Windows 10 Pro 1909 OS Build 18363.1256 Installed 4/22/2020

Desktop Machine:

Dell T3610, Xeon CPU E5-1620 0 @ 3.60GHz, 32 GB RAM

1.09 TB free on a 2TB Drive

Thank you - Community

Windows for home | Windows 10 | Windows update

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer recommended by moderator
Anonymous
2021-03-04T15:01:25+00:00

I have the same problem induced by transfering the windows10 from HDD to SDD disk, during the transfer the WinRE partition was lost!

To repair Bootloader, you should prepare a Windows 10 installation disc.

Step 1. Boot from Windows 10 installation disc and press any key to continue.

Step 2. Then navigate to Repair your computer->Troubleshoot->Advanced options->Command Prompt.

Step 3. Type diskpart in the command prompt.

Step 4. Type the following command and press Enter after each command.

List disk
Sel disk 0 (where 0 stands for the boot drive)
List vol (note which volume is the EFI partition, mine is 4)
Sel vol 4
assign letter=N:
Exit
Step 5. Type N: (the drive letter you just assigned and hit Enter.)

Step 6. After you have assigned a drive letter Using Diskpart, you can format the EFI partition using the following command.

format N: /FS:FAT32(type the label of the volume, my is SYSTEM)

Step 7. Now, type bcdboot C:\windows /s N: /f UEFI and hit Enter. This command will repair your Bootloader.(My windows are located in D:\windows)

Then try the bootrec /fixboot command again, fixboot access denied in Windows 10 could be solved.

Was this answer helpful?

2 people found this answer helpful.
0 comments

75 additional answers

Sort by: Oldest
Most helpful Newest Oldest
  1. Anonymous
    2021-07-23T00:28:45+00:00

    This tool found my error code Error: 0xC1900223 - 0x20009 to be related to abrupt down-level failure. Now to figure out how to fix that!

    Was this answer helpful?

    0 comments
  2. Sumit 44,981 Reputation points Volunteer Moderator
    2021-07-23T05:05:46+00:00

    This tool found my error code Error: 0xC1900223 - 0x20009 to be related to abrupt down-level failure. Now to figure out how to fix that!

    Please run Setupdiag and post the outcome. https://docs.microsoft.com/en-us/windows/deployment/upgrade/setupdiag

    Was this answer helpful?

    0 comments
  3. Anonymous
    2021-08-20T09:15:45+00:00

    I had the same problem installing update on 3 DELL Vostro i5 computers Windows 10 x64 Pro (the same configuration o those 3 computers, delivered the same day from the distributor on December 2019).

    The problem first took place on July 2020 when trying to update 1909 to 2004, windows was installing and after reboot rollbacking the chenges to 1909.

    On July 2021 windows was trying to install 20H2, also with error (0x80070020 or 0x80242016 or 0x1900101) on these 3 computers.

    I have tried all the ways found on this MS forum and on others forums, even I had 3 talks with Dell consultants, and 2 technical Microsoft chats with

    (one with remote desktop access to one of these computers). No one was able to help, the final answer was : download Dell ISO Windows 10 x64 Pro

    and install windows againg (with data backup done first).

    I have checked the update logs, analized the dump filed with the MS debuger installed from MS Store.

    After many hours of looking I found one forum with the same problem, when the SSD drive was cloned and the update 1909 was not able to install 2004.

    As I had the same 3 computers I was sure that Dell made one clean Windows 10 install with all the Dell drivers on one computer and then made SSD clones.

    The solution was to check the BCD file (Boot Configuration Data) in the section {bootmgr} if there is missing device parameter :

    • open CMD as Administrator
    • bcdedit On these 3 Dell computers I had no device parameter in {bootmgr}, so next on this CMD I ran 2 lines, each after each (the C: drive is the Windows 10 drive)
    • bcdedit /export C:\BCD.bak
    • bcdedit /set {bootmgr} device partition=C:

    Then close CMD, restart Windows, and after logging run the windows update. Then when windows installed the update and after rebooting there was 20H2

    version installed !!!

    Other people had also problems with BCD, but they had device parameter, they had some additional information that had to be deleted

    bcdedit /delete {ID}

    for example

    bcdedit /delete {b2d1a263-cc33-11e9-a476-ec8e4d5eb847}

    where {ID} was bad additional information.

    Was this answer helpful?

    0 comments