We couldn't update Windows 11 23H2 to 24H2 - error 0x80070002 - 0x20007

Anonymous
2024-11-23T16:35:26+00:00

Hi we have been trying to update Winodws 11 23H2 to 24H2 and keep getting this error. I understand its a driver issue but can't seem to find which driver is causing the problem?

I tried doing a clean install from the ISO file, tried the SFC and DISM and nothing. Actually now every time I start my computer I get the option to start in a different Windows 11 system, I am now up to 6 different boot Win11 boot options.
Please help and thanks in advance

Windows for home | Windows 11 | Windows update

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments No comments
Answer accepted by question author
Ramesh 183.8K Reputation points Volunteer Moderator
2024-12-02T03:24:30+00:00

The Realtek PCIE CardReader driver package is corrupt.

From the admin Command Prompt, run:

  • md C:\Drivers
  • DISM /online /export-driver /destination:C:\Drivers

The above commands backup the drivers. After the above operation is complete, run the following command to completely uninstall the Realtek PCIE CardReader driver package.

  • pnputil /delete-driver oem143.inf /uninstall /force

Please re-run Windows Setup.

Post fresh logs if the setup still fails.

Was this answer helpful?

0 comments No comments

24 additional answers

Sort by: Newest
  1. Anonymous
    2024-11-30T15:17:29+00:00

    Hi, I tried all the steps suggested by you and installing again the Windows 11 update via .iso and still get an error about drivers.
    I tried updating via Windows Update and Dell Support Assit and none have found any driver's update pending nor do I have any errors in device manager.

    How do I find out which driver is causing the problem?

    Please help, and thank you again in advance

    Image

    Was this answer helpful?

    0 comments No comments
  2. Anonymous
    2024-11-25T08:08:06+00:00

    Hello, thank you for your feedback, you can continue to refer to the following steps to fix some partial functions first:

    1. Remove redundant startup items

    From your description, it seems that there are multiple startup items (six), which may cause conflicts during the upgrade process. You can follow the steps below to clean up and remove these startup entries:

    Press Win + X and select Command Prompt (Administrator) or Windows Terminal (Administrator).

    Enter the following command to list all startup entries:

    bcdedit /enum all

    This will show you all the startup items recognized by Windows.

    To delete a startup item, you can use the bcdedit /delete command. For example, if you see a startup item with the identifier {current}, you can enter the following command to delete it:

    bcdedit /delete {identifier}

    Replace {identifier} with the actual GUID (identifier) of the startup item you want to delete.

    Note: Be careful when deleting startup items, make sure to remove only the redundant startup items and keep the major ones.

    1. Make sure the driver is up-to-date

    Although you mentioned that it could be a driver issue, updating the driver is very important to resolve upgrade errors. You can check for missing or outdated drivers as follows:

    Device Manager: Press Win + X and select Device Manager to see if there are devices with a yellow warning icon (indicating a driver problem).

    Windows Update: Sometimes Windows Update provides driver updates. Go to Settings > Update & Security > Windows Update to check if there are updates available, including optional driver updates.

    Manufacturer's website: If Device Manager or Windows Update cannot find a driver update, visit your PC manufacturer's website (e.g., Dell, HP, Lenovo, etc.), or the website of the relevant hardware manufacturer (e.g., Intel, AMD, NVIDIA, etc.), to manually download the latest driver.

    1. Run Windows Update Troubleshooter

    Windows has a built-in troubleshooting tool that can sometimes help diagnose and fix update problems:

    Go to Settings > System > Troubleshooting > Other Troubleshooting.

    Under Getting Started, find Windows Update and click Run.

    1. Checking for disk errors

    Since you mentioned that a clean install and use of the DISM/SFC tool did not solve the problem, file system corruption on the disk may prevent the update. You can check the disk for errors by following these steps:

    Open Command Prompt (Administrator) or Windows Terminal (Administrator) and enter the following command:

    chkdsk /f /r

    The system will ask you to restart the computer to perform a disk check, which will fix file system errors and bad sectors.

    Disclaimer: Running chkdsk can check the file system and file system metadata of a volume for logical and physical errors. To avoid any trouble for you, do not cancel or interrupt chkdsk, and back up important data.  

    More information please refer to this chkdsk | Microsoft Learn. 

    Also try the steps mentioned in the thread I shared to try and you can do some feedback after this.

    Best regards

    Bobhe | Microsoft Community Support Specialist

    Was this answer helpful?

    0 comments No comments
  3. Anonymous
    2024-11-24T16:32:18+00:00

    Hi Bobhe,

    Yes my system is Dell Inspiron 7391 2n1 laptop

    I did tried to update in place with the iso option as you mentioned but keep getting errors and it gets everything back to the way it was before trying the installation and then later I get the optional boot systems when I start my laptop. I'm already up to 6 and I dont want that to increment.

    Please advise on how to solve the update and what is bcd and how do i use it?

    Thanks for your help,

    Was this answer helpful?

    0 comments No comments
  4. Anonymous
    2024-11-24T09:00:46+00:00

    Hello, Ricardo Pestana

    Welcome to the Microsoft Community.

    Hello, thank you for your feedback on your issue here, it seems that your computer is not updating properly to 24H2.

    First of all, thank you for sharing the information, and to better help you, can I confirm with you that the 6 systems you mentioned should appear after the installation yes, they should be the ones that failed to install.

    Also, what is the exact model of your computer, there are some specific models that have known issues.

    Regarding the iso upgrade you mentioned, you can also try again by first referring to the steps mentioned in the thread below:

    Let’s try performing an in-place install or in-place upgrade which will refresh your Windows files and operating system without removing files or applications. That being said, we always recommend that if you have important data, you should back it up before making large system changes. If you want to back up your data first, please do so. Once you are done backing up, you can follow the steps in the following guides: How to run In-place upgrade in Windows 11 - Microsoft Community 

    If it still doesn't work you may need to do a bcd to repair the boot directory. You can do some feedback after this and I will continue to support you.

    Best regards

    Bobhe | Microsoft Community Support Specialist

    Was this answer helpful?

    0 comments No comments