Hello,
The failure at 77% does not identify a specific root cause; it commonly occurs during Windows Setup's configuration or specialization stages, so we need the actual Setup logs before attributing it to Tekla Structures 2025. Installing traditional Win32 applications such as Tekla Structures in Audit Mode before capturing a Windows image is a supported deployment scenario, provided the application and its dependencies support deployment through this method; Trimble also documents centralized MSI-based installation for Tekla Structures 2025. For the recommended capture procedure, install Windows 11 on a clean reference machine, enter Audit Mode, install Tekla Structures and its required environments, updates and dependencies, verify the application works, and execute %WINDIR%\System32\Sysprep\Sysprep.exe /generalize /oobe /shutdown; do not restart the reference machine into Windows after Sysprep completes. Boot into WinPE and capture the Windows partition using Dism /Capture-Image /ImageFile:E:\install.wim /CaptureDir:W:\ /Name:"Windows 11 Tekla Custom" /Compress:max /CheckIntegrity /Verify, replacing W: with the actual Windows partition and E: with your external storage drive, then replace the corresponding install.wim in your original Windows installation media and rebuild the ISO using the Windows ADK Deployment Tools and matching WinPE add-on. Ensure that the Windows edition, architecture, image index, storage drivers and boot configuration are correct, and avoid installing Microsoft Store applications through the Store during Audit Mode because per-user provisioning inconsistencies can cause Sysprep failures. To investigate the existing 77% failure, press Shift + F10 when the error appears and locate X:\Windows\Panther\setupact.log, X:\Windows\Panther\setuperr.log, the deployed Windows volume's Windows\Panther\setupact.log, Windows\Panther\UnattendGC, and Windows\System32\Sysprep\Panther; also examine Windows\INF\setupapi.dev.log and C:\Windows\Logs\DISM\dism.log where applicable, copying the logs to an external drive before rebooting because WinPE logs may be temporary. If setuperr.log does not exist, that does not mean Setup generated no diagnostic information; setupact.log is the primary diagnostic log, and the exact failure should be identified from its final entries and the corresponding Setup phase rather than the percentage displayed.
If my answer is useful for you, please hit Accept the answer to support me.
Thank you.
Domic Vo.