In Windows 11, add the scanner component of the HP OfficeJet Pro 8034e from Settings > Bluetooth & devices > Printers & scanners, even though its printer component is already visible.
Add and verify the scanner
- Turn on the HP 8034e and ensure the laptop and printer are connected to the same local network.
- Open Start > Settings > Bluetooth & devices > Printers & scanners.
- Select the existing HP OfficeJet Pro 8034e entry.
- Look for Scanner settings:
- If present, Windows has installed the scanner. Open Windows Scan or HP Smart and select the 8034e.
- If absent, return to Printers & scanners.
- Next to Add a printer or scanner, select Add device.
- Wait several minutes for Windows to search the network, then select Add device beside the HP scanner when it appears.
A multifunction device may appear only under its printer name; the presence of Scanner settings confirms that Windows also recognizes its scanner component.^1^
If Windows does not find the scanner
Install the HP scanning components rather than relying only on the Windows print driver:
- Download and run HP Print and Scan Doctor.
- Select the HP OfficeJet Pro 8034e and run the scanner diagnosis.
- Install or reinstall HP Smart/full-feature HP software when prompted.
- Restart the printer and laptop after installation.
- Return to Settings > Bluetooth & devices > Printers & scanners, select the HP device, and check again for Scanner settings.
HP recommends its diagnostic tool and reinstalling the HP software stack when an HP printer works but its scanner is not found.^2^ The Print and Scan Doctor download is available from HP.^3^
Test scanning
- Search Windows for Windows Scan.
- Open Scan.
- Choose the HP OfficeJet Pro 8034e from the Scanner list.
- Select Flatbed, Feeder, or Auto-configured, and then select Scan.
If Windows Scan is not installed, obtain it through the Microsoft Store. By default, completed scans are saved under Pictures\Scans.^4^
Last fallback
If HP software still cannot detect the scanner, remove the HP device under Settings > Bluetooth & devices > Printers & scanners, restart Windows, and then reinstall it with HP’s Windows 11 software. Removing the device temporarily removes its current printer configuration, so have the network credentials available before proceeding.
References
- [Windows 11](https://support.microsoft.com/windows/hardware/printer/install-and-use-a-scanner-in-windows#install-or-add-a-network,-wireless,-or-bluetooth-scanner)
- HP printers - Scanner not found or connected (Windows, macOS) | HP® Support
- https://support.hp.com/us-en/drivers/print-and-scan-doctor
- Install and use a scanner in Windows | Microsoft Support