Install Epson Scan 2 for the ET-4850 from Epson’s product-specific support page, then scan the document to your computer and attach the saved file to an email—no landline or fax service is required.
Install the ET-4850 scanner software
- Open the official Epson ET-4850 support page.
- Select Downloads.
- Confirm that Windows 11 is selected as the operating system.
- Download and install Epson Scan 2 and, if offered, Epson ScanSmart. These are the Epson utilities intended for scanning with this model.^1^
- Restart the computer after installation.
- Open Start, search for Epson Scan 2 or Epson ScanSmart, and perform a test scan.
If using Wi-Fi, the printer and computer must be connected to the same wireless network. If using USB, connect the printer directly to the computer and turn it on.
Confirm Windows detects the scanner
- Open Start → Settings → Bluetooth & devices → Printers & scanners.
- Select the Epson ET-4850.
- Look for Scanner settings. A multifunction device may be displayed as a printer, but the presence of Scanner settings confirms that Windows also recognizes its scanner.^2^
- If the ET-4850 is absent, select Add device beside Add a printer or scanner, wait for the search, and add it.
Scan with Windows Scan instead
If Epson’s application does not open but Scanner settings appears:
- Search the Start menu for Windows Scan.
- If it is not installed, install Windows Scan from the Microsoft Store.
- Place the document face down on the flatbed, or place multiple pages in the document feeder.
- In Windows Scan:
- Select the Epson ET-4850 under Scanner.
- Choose Flatbed, Feeder, or Auto-configured under Source.
- Choose a file type. JPEG, PNG, TIFF, and Bitmap are available.
- Under Show more, choose the destination folder.
- Select Scan. If no destination is selected, Windows normally saves it under Pictures\Scans.^2^
To send the document without fax, open your email, create a new message, select Attach, and choose the scanned file from its saved folder.
If Windows sees only the printer
Reinstall the complete Epson package rather than relying on a basic printing driver:
- Go to Settings → Bluetooth & devices → Printers & scanners.
- Select the ET-4850 and choose Remove.
- Restart the computer—not merely shut it down and turn it back on.
- Reinstall the Windows 11 software from the ET-4850 Epson support page.
- Return to Printers & scanners → Add device and add the ET-4850 again.
Microsoft recommends obtaining a driver that matches Windows 11 and the computer’s 32-bit or 64-bit system type; removing and reinstalling the device refreshes its drivers and settings.^3^
If Epson Scan 2 opens but cannot find a network scanner, use Epson’s ET-4850 network-scanner troubleshooting instructions.^4^
References
- Epson ET-4850 | Support | Epson US
- [Windows 11](https://support.microsoft.com/windows/hardware/printer/install-and-use-a-scanner-in-windows#scan-a-picture-or-document-with-the-windows-scan-app)
- [Windows 11](https://support.microsoft.com/windows/hardware/printer/fix-printer-driver-compatibility-issues-in-windows)
- faq-00004d9-et4850 | SPT_C11CJ60202 | Epson ET-4850 | ET Series | All-In-Ones | Printers | Support | Epson US