Create a bootable USB installer for Windows 10 IoT Enterprise LTSC 2021; running that edition as a portable Windows installation directly from USB is not a currently supported option because Windows To Go was removed starting with Windows 10 version 2004.^1^
1. Obtain the correct ISO and licence
The normal Windows 10 Media Creation Tool does not provide Windows 10 IoT Enterprise LTSC 2021. Obtain the ISO through the channel associated with your entitlement:
- For an OEM/device-maker licence, request it from your authorized Windows IoT distributor.
- For an eligible enterprise agreement, obtain the installation media from your Volume License Administrator.
- Previous Windows IoT Enterprise versions may also be available if your Visual Studio subscription includes them.
Windows 10 IoT Enterprise LTSC 2021 is intended for fixed-function specialized devices, not as a general-purpose desktop replacement.^2^ Its release requires an appropriate licence.^3^
Do not substitute a normal Windows 10 Home/Pro ISO—it does not contain the requested IoT LTSC edition.
2. Create the bootable installer
Use an empty USB drive of at least 8 GB. These commands completely erase the selected drive, so verify its disk number by capacity before running clean.
- Connect the USB drive to a working Windows PC.
- Open Command Prompt as administrator.
- Run
diskpart, thenlist disk. - Identify the USB by its capacity and replace
Xbelow with its disk number:
diskpart
list disk
select disk X
clean
create partition primary
select partition 1
active
format fs=fat32 quick
assign
exit
- In File Explorer, double-click the LTSC 2021 ISO to mount it.
- Copy all files and folders from the mounted ISO to the root of the USB drive.
This is Microsoft’s documented preparation method for Windows IoT Enterprise installation media.^4^
If copying fails because install.wim is too large
FAT32 cannot hold an individual file larger than 4 GB. If sources\install.wim exceeds that size, do not simply omit it or reformat the entire installer as NTFS. Copy the remaining files and use DISM to split install.wim into .swm files, following the “If your Windows image is larger than 4 GB” procedure linked from Microsoft’s IoT preparation guide.^4^
3. Install Windows onto the IoT device
- Shut down the destination device.
- Insert the installer USB.
- Power it on and open its firmware boot menu. The key varies by manufacturer; consult the device documentation.
- Select the USB drive, preferably its UEFI entry if shown.
- In Windows Setup, choose the language and keyboard settings, then select Install now.
- Enter the valid product key supplied with your licence. If Setup offers I don’t have a product key, installation can continue, but the installed edition still requires valid activation entitlement.
- Choose Custom installation and select the internal drive on which Windows will be installed.
- After Setup copies the files and restarts, remove the USB when the system begins booting from the internal drive.
Deleting partitions during Setup destroys all data on the selected internal disk. Back up anything required before doing so.
The target should meet the Windows 10 IoT Enterprise requirements, including at least a 1 GHz processor and 20 GB storage for the documented x64 configuration.^5^
About booting and using Windows directly from USB
A USB that starts Windows Setup is supported installation media; it does not run the installed operating system from that USB. The old portable-workspace feature was Windows To Go, and Microsoft removed it beginning with Windows 10 version 2004.^1^
For a portable maintenance environment, use WinPE instead. WinPE is intended for installation, deployment, and repair—not as a full everyday Windows desktop. Microsoft documents creating it through the Windows ADK and WinPE add-on.^6^
References
- Features and functionality removed in Windows client
- Windows IoT Enterprise LTSC in Volume License (windows10)
- What's new in Windows 10 IoT Enterprise LTSC 2021
- Quickstart: Prepare your lab environment
- Minimum System Requirements for Windows IoT Enterprise
- Quickstart: Sysprep and capture the reference device image, and deploy to a new device