KB5127936 – Windows 11 Fails to Boot After Update (SrtTrail.txt Error)

Brian 25 Reputation points
2026-11-04T00:57:27.9133333+00:00

After installing Windows update KB5127936, an ASUS VivoBook X515EA running Windows 11 Home stopped booting normally.

The computer displays the ASUS logo, then goes to a black screen or restarts, eventually entering Automatic Repair with an SrtTrail.txt error.

Troubleshooting performed:

Uninstalled/rolled back the latest quality update, but the issue persisted.

Attempted Startup Repair, which was unsuccessful.

Rebuilt the EFI boot files and BCD configuration without success.

  • Ran SFC, which reported no integrity violations.

The computer was operating before the update, and the failure occurred immediately afterwards. I suspect KB5127936 may have introduced a boot-related issue or triggered corruption that was not reversed when the update was uninstalled.

Has anyone else experienced boot failures after installing KB5127936? Is Microsoft aware of any compatibility issues, and is there a recommended repair procedure that does not require reinstalling Windows? I had to completely wipe the PC and start fresh.

Windows for home | Windows 11 | Windows update

3 answers

Sort by: Oldest
  1. Dio Xavier 298.9K Reputation points Volunteer Moderator
    2026-11-04T01:34:11.2+00:00

    Hello,

    Welcome to the Microsoft Windows Community.

    Good evening, @Brian . Let’s try a repair using Windows RE:

    1. Connect the charger, hold down the Shift key, and restart the computer three consecutive times when the Asus logo appears.

    2. Once you reach the repair screen, click on "Advanced options" -> "Reset this PC" -> "Get started" -> "Keep my files."

    Please let us know the outcome.

    Was this answer helpful?

    1 person found this answer helpful.

  2. HumbleTechJP 0 Reputation points
    2026-11-13T07:08:02.9233333+00:00

    Hi Brian,

    Sorry if you've already found a solution, but I experienced the same issue after installing KB5127936.

    After doing some research, I noticed that VBS (Virtualization-Based Security) related to Memory Integrity (Core Isolation) can be automatically enabled.

    If you can still access Command Prompt from WinRE, could you try the following?

    (1) Check whether VBS is running

    powershell -NoProfile -Command "Get-CimInstance -Namespace root\Microsoft\Windows\DeviceGuard -ClassName Win32_DeviceGuard | Format-List VirtualizationBasedSecurityStatus,SecurityServicesRunning"
    

    Please check whether the value is 2.

    If it is 2, the following step (2) might fix the issue. If it is 0, VBS is not running, which means the cause is likely something else, so this workaround won't help.

    (2) Disable VBS

    reg load HKLM\OFFSYS C:\Windows\System32\config\SYSTEM
    reg add HKLM\OFFSYS\ControlSet001\Control\DeviceGuard /v EnableVirtualizationBasedSecurity /t REG_DWORD /d 0 /f
    reg unload HKLM\OFFSYS
    

    I wonder if this will allow Windows to boot again.

    By the way, it seems there may also be a mechanism that automatically re-enables VBS. So, if you performed step (2), please also check the following.

    (3) Check whether VBS will be re-enabled on the next boot

    reg query "HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard" /v EnableVirtualizationBasedSecurity
    

    If the value is 0x1, VBS may be enabled again, so you may want to disable it using step (4).

    If the value is 0x0, step (4) is not necessary.

    (4) Prevent VBS from being enabled again

    reg add "HKLM\SOFTWARE\Policies\Microsoft\Windows\DeviceGuard" /v EnableVirtualizationBasedSecurity /t REG_DWORD /d 0 /f
    reg add "HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\HypervisorEnforcedCodeIntegrity" /v Enabled /t REG_DWORD /d 0 /f
    reg add "HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard" /v EnableVirtualizationBasedSecurity /t REG_DWORD /d 0 /f
    

    The three commands above do the following:

    Line 1: Applies the equivalent of setting VBS to Disabled through Group Policy.

    Line 2: Explicitly disables Memory Integrity.

    Line 3: Disables the current VBS configuration.

    I hope this helps!

    By the way, I'm a Japanese engineer, so I'm using a translation tool to write this post. I apologize in advance if anything sounds awkward or comes across as rude.

    Was this answer helpful?


  3. Deleted

    This answer has been deleted due to a violation of our Code of Conduct. The answer was manually reported or identified through automated detection before action was taken. Please refer to our Code of Conduct for more information.


    Comments have been turned off. Learn more

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.