Hi Brian,
Sorry if you've already found a solution, but I experienced the same issue after installing KB5127936.
After doing some research, I noticed that VBS (Virtualization-Based Security) related to Memory Integrity (Core Isolation) can be automatically enabled.
If you can still access Command Prompt from WinRE, could you try the following?
(1) Check whether VBS is running
powershell -NoProfile -Command "Get-CimInstance -Namespace root\Microsoft\Windows\DeviceGuard -ClassName Win32_DeviceGuard | Format-List VirtualizationBasedSecurityStatus,SecurityServicesRunning"
Please check whether the value is 2.
If it is 2, the following step (2) might fix the issue. If it is 0, VBS is not running, which means the cause is likely something else, so this workaround won't help.
(2) Disable VBS
reg load HKLM\OFFSYS C:\Windows\System32\config\SYSTEM
reg add HKLM\OFFSYS\ControlSet001\Control\DeviceGuard /v EnableVirtualizationBasedSecurity /t REG_DWORD /d 0 /f
reg unload HKLM\OFFSYS
I wonder if this will allow Windows to boot again.
By the way, it seems there may also be a mechanism that automatically re-enables VBS. So, if you performed step (2), please also check the following.
(3) Check whether VBS will be re-enabled on the next boot
reg query "HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard" /v EnableVirtualizationBasedSecurity
If the value is 0x1, VBS may be enabled again, so you may want to disable it using step (4).
If the value is 0x0, step (4) is not necessary.
(4) Prevent VBS from being enabled again
reg add "HKLM\SOFTWARE\Policies\Microsoft\Windows\DeviceGuard" /v EnableVirtualizationBasedSecurity /t REG_DWORD /d 0 /f
reg add "HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\HypervisorEnforcedCodeIntegrity" /v Enabled /t REG_DWORD /d 0 /f
reg add "HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard" /v EnableVirtualizationBasedSecurity /t REG_DWORD /d 0 /f
The three commands above do the following:
Line 1: Applies the equivalent of setting VBS to Disabled through Group Policy.
Line 2: Explicitly disables Memory Integrity.
Line 3: Disables the current VBS configuration.
I hope this helps!
By the way, I'm a Japanese engineer, so I'm using a translation tool to write this post. I apologize in advance if anything sounds awkward or comes across as rude.