Turn off any unintended manual proxy first, then repair the Windows network connection without disabling the firewall.
1. Check the proxy setting
- Open Start → Settings → Network & Internet → Proxy.
- Under Automatic proxy setup, leave Automatically detect settings turned on.
- Under Manual proxy setup, turn Use a proxy server off.
- Close and reopen the browser, then try another search.
A work or school computer may require a proxy; in that case, do not remove it permanently—ask the organization’s IT administrator for the correct proxy address and setup script. ^1^
Also disconnect any VPN temporarily and test again. If searches work afterward, check the VPN configuration or contact its provider.
2. Run the network troubleshooter
- Windows 11: Open Start → Settings → System → Troubleshoot → Other troubleshooters, then run Network and Internet.
- Windows 10: Open Start → Settings → Network & Internet → Status → Network troubleshooter.
After it completes, reconnect to Wi-Fi and test the browser. Microsoft recommends this automated diagnostic before the more invasive network-repair options. ^2^
3. Reset the network connection commands
Right-click Start, open Command Prompt (Admin) or Windows Terminal (Admin), and run these commands in order:
netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns
Restart the PC afterward. These commands reset Windows networking, obtain a new IP address, and clear cached DNS records. ^2^
4. Keep the firewall enabled
Do not leave Microsoft Defender Firewall disabled. Instead:
- Open Windows Security → Firewall & network protection.
- Confirm the firewall is On for the currently active network.
- Select Allow an app through firewall.
- If only one browser fails, allow that browser on the appropriate network type, then test it again.
- If firewall rules were changed previously, select Restore firewalls to default.
Restoring defaults removes custom firewall rules, so applications that require special rules may need to be allowed again. Incorrect firewall changes can make applications fail or reduce system security. ^3^
5. Isolate the problem
Test the following:
- Open a different browser.
- Connect the computer to another network, such as a phone hotspot.
- Try the same Wi-Fi connection from another phone or computer.
If every browser works on the hotspot but not the normal Wi-Fi, the router, DNS service, or network policy is the likely area to investigate. If only one browser fails, reset or repair that browser rather than resetting Windows networking.
Last resort: Network reset
Use this only if the earlier steps fail because it removes installed network adapters and returns their settings to defaults:
- Windows 10: Settings → Network & Internet → Status → Network reset → Reset now
- Restart the PC and reconnect to Wi-Fi.
VPN software or virtual network adapters might need to be configured again afterward. ^4^
If “search” means the Windows taskbar/Start-menu search rather than searching websites in a browser, proxy and firewall changes may not be relevant. Record what happens—no results, endless loading, or an error—and obtain the Windows version by pressing Windows+R, entering winver, and selecting OK. ^5^
References
- Error code 30125-4 or 30125-1011 when installing Office | Microsoft Support
- Windows 10 (#tab/windows-10)
- Firewall and network protection in the Windows Security app | Microsoft Support
- Windows 10 (#tab/windows-10)
- My PC will not search. Can you help me restore the search functionality? - Microsoft Q&A