Exceeded Storage Size on a Mailbox

Minh Vu 40 Reputation points
2026-11-19T04:21:26.8833333+00:00

Hi guys,

we have an issue that is we have exceeded mailbox usage even though we have enabled the Online archive which is working well - my team has been archiving a lot of items. However, it seems like mailbox usage did not reflect or update a correct number.

Can someone please help how to get the mailbox reflect its correct mailbox storage? Thank youu

Please refer to 2 screenshots below:

User's image

User's image

Exchange Online
Exchange Online

A cloud-based service included in Microsoft 365, delivering scalable messaging and collaboration features with simplified management and automatic updates.

0 comments No comments

2 answers

Sort by: Oldest
  1. AI answer

    2026-11-19T04:23:02.0566667+00:00

    The primary mailbox is independently at its quota—100 GB used against 99 GB—so verify its visible and hidden usage, then run the Managed Folder Assistant to process the archive policy rather than expecting the archive’s free capacity to increase the primary-mailbox quota.

    1. Measure the actual primary and archive usage

    Connect to Exchange Online PowerShell with an account that has the required Exchange permissions, then replace the example address:

    $user = "[Email]"
    
    Get-Mailbox $user |
      Format-List ProhibitSendReceiveQuota,RecoverableItemsQuota,
                  ArchiveStatus,ArchiveState,RetentionPolicy
    
    Get-EXOMailboxStatistics -Identity $user |
      Format-List TotalItemSize,TotalDeletedItemSize
    
    Get-MailboxStatistics -Identity $user -Archive |
      Format-List TotalItemSize,TotalDeletedItemSize
    

    Microsoft recommends Get-EXOMailboxStatistics for Exchange Online. Get-MailboxStatistics -Archive retrieves statistics specifically for the associated archive mailbox.^1^

    Interpret the results separately:

    • Primary TotalItemSize: content visible to the user.
    • Primary TotalDeletedItemSize: hidden Recoverable Items content.
    • Archive statistics: a separate mailbox and quota; the screenshot shows only 61.29 GB used there.
    • If primary TotalItemSize is around 100 GB, the displayed usage is genuine even though the archive has available space.
    • If TotalDeletedItemSize is near or beyond RecoverableItemsQuota, hidden Recoverable Items may be producing the full-mailbox condition.^2^

    2. Process the existing archive policy

    Because archiving is already enabled and items are moving, do not recreate the archive. Check the assigned policy and start mailbox processing:

    $user = "[Email]"
    
    Get-Mailbox $user |
      Format-List RetentionPolicy,RetentionHoldEnabled,ElcProcessingDisabled
    
    Start-ManagedFolderAssistant -Identity $user
    

    Wait at least one hour, then rerun the size commands. The Managed Folder Assistant (MFA) applies the configured retention/archive rules; normal processing can take up to seven days, particularly for large mailboxes.^3^

    If the primary size does not fall:

    • RetentionHoldEnabled = True pauses retention processing.
    • ElcProcessingDisabled = True prevents MFA processing.
    • A disabled tag or a personal tag such as never move to archive can override the expected archive action.
    • A policy containing only personal tags requires users to apply those tags themselves.

    Review the policy and its linked tags:

    $mbx = Get-Mailbox $user
    $mbx | Format-List RetentionPolicy,*Hold*,ElcProcessingDisabled
    
    Get-RetentionPolicy -Identity $mbx.RetentionPolicy |
      Select-Object -ExpandProperty RetentionPolicyTagLinks
    
    Get-RetentionPolicyTag | Format-Table Name,Type,
      RetentionEnabled,RetentionAction,AgeLimitForRetention
    

    Do not disable a hold merely to reduce storage. First identify whether it is RetentionHoldEnabled, Litigation Hold, an eDiscovery hold, or Microsoft Purview retention, because these mechanisms have different preservation purposes.

    3. If Recoverable Items is consuming the quota

    Inspect its folders directly:

    Get-MailboxFolderStatistics -Identity $user `
      -FolderScope RecoverableItems |
      Format-Table Name,FolderAndSubfolderSize,
                   ItemsInFolderAndSubfolders
    

    This reports the Recoverable Items folder and its subfolders in the primary mailbox.^4^

    Only if the mailbox is on litigation or retention hold and Recoverable Items is full, Microsoft documents shortening the applicable RecoverableItems archive tag and then running MFA:^5^

    Get-RetentionPolicyTag |
      Format-Table Name,Type,RetentionAction,AgeLimitForRetention
    
    Set-RetentionPolicyTag "<RecoverableItems policy tag>" `
      -AgeLimitForRetention 1
    
    Start-ManagedFolderAssistant -Identity $user
    

    Changing a shared tag affects every mailbox whose policy uses it. If this one-day setting should not apply tenant-wide, create and assign an appropriately scoped policy/tag instead of modifying a broadly used tag.

    Do not purge Recoverable Items while a preservation hold or single-item recovery requirement applies. Deletion can conflict with legal or compliance obligations; Microsoft recommends raising the Recoverable Items quota rather than deleting held content when that quota is reached.^6^

    If usage remains unchanged after MFA has completed and the policy/tag checks show no blocker, collect the MRM diagnostic log and open a Microsoft support case:

    Export-MailboxDiagnosticLogs $user -ComponentName MRM
    

    References

    1. Get-MailboxStatistics-Syntax
    2. "Mailbox is full" warning even if the mailbox hasn't reached the storage limit
    3. Resolve email archive and deletion issues when using retention policies
    4. Retrieves the current size and total number of items in the Recoverable Items folder and its subfolders in the primary mailbox of a specified user using Exchang...
    5. Recoverable Items folder not emptied for mailbox on litigation or retention hold
    6. Clean up the Recoverable Items folder
    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

  2. JeseminQH 1,220 Reputation points Independent Advisor
    2026-11-19T06:05:37.0866667+00:00

    Hi @Minh Vu

    From the details provided, the Online Archive appears to be enabled with 61.29 GB in use, while the primary mailbox is reporting 100 GB used against its 99 GB limit.

    Moving messages to the regular Archive folder does not reduce primary mailbox usage. They must be moved to Online Archive – username. Also, retention holds or items in the hidden Recoverable Items folder may still count toward the primary mailbox’s storage. If messages were recently moved, please allow 24–48 hours for the usage information to update.

    Could you please confirm whether the messages were moved to the regular Archive folder or to the separate Online Archive – [mailbox name]? The regular Archive folder remains part of the primary mailbox, so messages stored there continue to use primary mailbox space. 

    If you have the Exchange Administrator role, you can use Exchange Online PowerShell to check where the storage is being used. Replace username with the affected user’s email address.

    First, connect to Exchange Online: 

    Connect-ExchangeOnline 
    

    Then, replace username with the affected mailbox address and run the following commands: 

    Check the primary mailbox: 

    Get-EXOMailboxStatistics -Identity username |
        Format-List TotalItemSize,TotalDeletedItemSize,ItemCount
    

    Pay particular attention to TotalDeletedItemSize. If this value is unusually large, the Recoverable Items folder may be responsible for much of the mailbox usage.

    Check the Online Archive: 

    Get-EXOMailboxStatistics -Identity username -Archive |
        Format-List TotalItemSize,TotalDeletedItemSize,ItemCount
    

    This confirms how much data is currently stored in the Online Archive.

    These commands are read-only and do not change or delete mailbox content. They show the current size and item count of the primary mailbox and Online Archive separately. This can help determine whether the messages were successfully moved or whether the usage displayed in the admin center has not yet been updated. 

    For additional information, see the Get-EXOMailboxStatistics. 

    If the messages are being moved automatically through an Exchange retention policy, processing may not happen immediately. The Managed Folder Assistant normally processes mailboxes at least once every seven days, although processing often occurs daily. The administrator can initiate processing without waiting for the normal schedule by running: 

    Start-ManagedFolderAssistant -Identity username.com 
    

    This command starts retention-policy processing but does not display progress or confirm immediately when processing has finished. 

    For more information, see: 

    Feel free to take your time and reply when it is convenient for you, and I will be happy to assist you further.     

    Was this answer helpful?


Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.