An integrated threat protection solution designed to detect, investigate, and respond to cyber threats across Microsoft 365 services.
A stop code that mentions memory, combined with black screens and buzzing audio, usually points to a serious Windows crash caused by hardware, a driver, or related software. The first useful detail is the exact stop code text, because Windows shows it at the bottom of the crash screen and it helps narrow down the cause.
Try these steps in order:
- Note the exact stop code next time it appears
Look for the text at the bottom of the screen, such as
MEMORY_MANAGEMENTorPAGE_FAULT_IN_NONPAGED_AREA. - Check Device Manager for driver problems
- Right-click Start and select Device Manager.
- Look for any device with an exclamation mark
!. - Right-click that device and select Update driver.
- If updating does not help, try Disable device or Uninstall device.
- Install the latest Windows updates Go to: Start > Settings > Update & Security > Windows Update > Check for Windows updates
- Make sure the drive has enough free space Windows needs free disk space for swap files and other functions. A good target is 10% to 15% free space.
- Run Windows Memory Diagnostics
- Open Control Panel.
- Search for Memory.
- Select Diagnose your computer's memory problems.
- After the test finishes, open Event Viewer and check the System log for MemoryDiagnostics-Results.
- Check Event Viewer for related errors
- Open Event Viewer.
- Check the System log.
- Look for critical or error events that happened at the same time as the crash. This can help identify the device or driver involved.
- Start in Safe Mode if crashes keep happening Safe Mode loads only the minimum required drivers and services, which helps isolate whether a driver is causing the problem.
- If new hardware was added recently, remove it temporarily New hardware or incompatible hardware can trigger stop code errors.
- If the issue started after a recent driver or system change, roll back that change Recently added drivers or system services are a common cause of bug checks.
If the crashes continue, configure Windows to save a memory dump so the crash can be analyzed:
- Search for Advanced system settings and press Enter.
- On the Advanced tab, under Startup and Recovery, select Settings.
- Under Write debugging information, choose Automatic memory dump.
- Select OK and restart the PC.
- Dump files are typically saved in
%SystemRoot%\MEMORY.DMPor%SystemRoot%\Minidump.